CHOP CULT HOME
Email Password
Search
  1. #1
    Junior Member

    Content on this page requires a newer version of Adobe Flash Player.

    Get Adobe Flash player


    Join Date
    Oct 2012
    Posts
    2

    Default Wheel Bearing Help

    Hey All, Long time reader, 1st time poster here and really could use some help. I am in the process of a build. Bought a Twisted chopper frame, and using all I can off of my donor bike (06 Buell XB12Ss) Will be swapping over as much as I can and I have hit a road block The axle on the new frame is 1'' diameter. I am needing to find a place that carries the following spec wheel bearing since I can't use the stock Buell rear axle.
    OD 55mm
    ID 25.4mm
    Width 13mm
    Any help would be appreciated, or if someone can point me in the right direction!

    Thanks
    Rusty

  2. #2
    Senior Member

    Content on this page requires a newer version of Adobe Flash Player.

    Get Adobe Flash player


    Join Date
    Jan 2011
    Posts
    303

    Default

    You need to find a bearing house and pay them a visit with those specs. You may have to end up using a different axle. The front wheel is something you really don't want to skimp on.......


    Sixball

  3. #3
    Junior Member

    Content on this page requires a newer version of Adobe Flash Player.

    Get Adobe Flash player


    Join Date
    Oct 2012
    Posts
    2

    Default

    Sorry, Ya I have been searching everywhere. It's actually the rear axle.

Share This



Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Log in

Log in