Was wondering if there is a procedure for pulling the baffles from a pair of 2000 Sportster mufflers?
Is it as simple as bashing them out or do I have to cut them out?
The mufflers are these style
Thanks in advance
You really can't remove them without cutting the muffler apart. Just drill the center out of the baffle or use a sharpened 1/2in. or whatever size steel rod to punch a hole in it.
well it is that easy, that guy just did it, or you can get a large enough hole saw and do the same thing, you cut around the end there and it slides right out. I've done it on a set at the shop
didnt you just answer your own question when you posted up that video?
While I thought i had my answer, it never hurts to get a second or third set of eyeballs on a problem. Especially when those eyes are allot more experienced than your own.
Thanks for the help guys.