CHOP CULT HOME
Email Password
Search
  1. #1
    Junior Member

    Content on this page requires a newer version of Adobe Flash Player.

    Get Adobe Flash player


    Join Date
    Sep 2009
    Posts
    18

    Default 80 Evo & ignition coil swap, etc

    Folks,

    I'm having one of those days when I am considering having L-E-F-T tattooed on the knuckles of my left hand.

    I'm doing some Winter work on my SPS, and am spacing on the wiring for the stock HD 31614-83A ignition coil, specifically if the two rear-most leads (not coil to spark plug wires, but then there's one from each side for those...) are the positives, which I suspect may be true.

    What I'm looking for is which small 'lead' connected to the coil terminals is which, the ignition to plug cables are obvious, but there are two wires attached to the rear terminal of the coil, one to the forward terminal. The Accel coil has a central negative terminal, and two (outer) positive terminals. I haven't chased the wires 'cause I've been tearing my Honda down...
    Last edited by c4ff31n3; 02-12-2010 at 8:53 AM.

  2. #2
    Senior Member

    Content on this page requires a newer version of Adobe Flash Player.

    Get Adobe Flash player


    Join Date
    Sep 2009
    Posts
    779

    Default You said you have an accel....

    coil or full ignition, with cam plate and rotor?

  3. #3
    Junior Member

    Content on this page requires a newer version of Adobe Flash Player.

    Get Adobe Flash player


    Join Date
    Sep 2009
    Posts
    18

    Default

    Coil. This one: http://www.accel-motorcycle.com/Prod...minselection=3

  4. #4
    Senior Member

    Content on this page requires a newer version of Adobe Flash Player.

    Get Adobe Flash player


    Join Date
    Aug 2009
    Posts
    1,565

    Default

    you need an ignition?

  5. #5
    Junior Member

    Content on this page requires a newer version of Adobe Flash Player.

    Get Adobe Flash player


    Join Date
    Sep 2009
    Posts
    18

    Default

    No,

    true-to-life low BAH. I am trying to remember the wiring for the stock H-D 2.89 ignition coil, so I can replace it with the Accel. I'm working both the SuckerPunch and the Honda, so am a bit spacy on the wiring for the SPS.

Share This



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Log in

Log in