CHOP CULT HOME
Email Password
Search
  1. #1
    Junior Member

    Content on this page requires a newer version of Adobe Flash Player.

    Get Adobe Flash player


    Join Date
    Aug 2009
    Posts
    25

    Default whos runnin 1" bars on an xs or any jap bike

    trying to find a clutch lever assembly that will work with the xs cable and adjuster.

    the one i have been using is set up for a harley ball type cable and isnt threaded for an adjuster at the lever. its a bitch and im sick of it........i think i may cry

  2. #2
    Senior Member

    Content on this page requires a newer version of Adobe Flash Player.

    Get Adobe Flash player


    Join Date
    Jul 2009
    Posts
    1,323

    Default

    Im running one inch on my XS, all you have to do is grind down a 7/8 alloy leer assembly to make it fit.

  3. #3
    Senior Member

    Content on this page requires a newer version of Adobe Flash Player.

    Get Adobe Flash player


    Join Date
    Jul 2009
    Posts
    180

    Default solution...

    Buy a dirt bike clutch (that fit 7/8" bar) that has a full nylon sleeve inside (see attached pic). The nylon sleeve is generally 1/16" thick so remove that and you have a perch that will fit a 1" bar.

    ~E
    Attached Thumbnails Attached Thumbnails clutch.jpg  

  4. #4
    Senior Member

    Content on this page requires a newer version of Adobe Flash Player.

    Get Adobe Flash player


    Join Date
    Aug 2009
    Posts
    126

    Default

    Kawasaki W650 uses 1' bars so the clutch assembly will fit your UJM cable.

  5. #5
    Junior Member

    Content on this page requires a newer version of Adobe Flash Player.

    Get Adobe Flash player


    Join Date
    Aug 2009
    Posts
    25

    Default c

    cool

    ill go check out some dirtbike setups thanks this setup has been pissing me off for about a year haha

  6. #6
    Senior Member

    Content on this page requires a newer version of Adobe Flash Player.

    Get Adobe Flash player


    Join Date
    Jul 2009
    Posts
    712

    Default

    Also look at most modern Jap cruisers . They pretty much all use 1" nowdays
    I do believe V-stars will be a bolt on

  7. #7
    BandR
    Guest

    Default

    yeah! i got a v-star. that thing is threaded.

    whats up trumpnut! Hung out with you at the smoke out under the biltwell tent!

  8. #8
    Junior Member

    Content on this page requires a newer version of Adobe Flash Player.

    Get Adobe Flash player


    Join Date
    Nov 2009
    Posts
    19

    Default

    i am running the 1" bars...i have a roadstar clutch perch and am using the stock xs cable. all i had to do was take the little insulator off the barrel on the roadstar cable and put it on the xs barrel that sits in the clutch lever.

  9. #9
    Senior Member

    Content on this page requires a newer version of Adobe Flash Player.

    Get Adobe Flash player


    Join Date
    Aug 2009
    Posts
    460

    Default

    Most kawi vulcans run 1" bars too

Share This



Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Log in

Log in