I wanna see stock rakes with extended forks

[beaverbeavs]

eddies ironhead

http://chicomoto.blogspot.com/2012/02/shreddie.html

[MotorLeaguer]

I need some 41mm 6overs. Any recommendations?

[Xhane]

21" front wheel, 16" rear wheel.
6" over in the first pic and 4" over in the second pic.

[sidewindersigns]

I need some 41mm 6overs. Any recommendations?

I've been looking for the same ones. The best deal I've found is from Forking by Frank's. They quoted me $190 plus shipping. From what I've read, these are top quality and much thicker-walled than the stock tubes.

[thebeezakid]

Frank's is the only way to go.

I can't figure out how to make the pictures small enough, but here is a link to mine. 16" in the back 19" in the front. 8" over. I wish I had gone 10". If anybody wants 8" over I'll sell mine.

http://donovanspeed.com/2007-sportster-chopper/

[Douglas]

I love this thread!

[elmiguel13]

My Dyna w 4 overs with the mustang tank, and 6 overs with the sporty tank. Stock rake, 32 deg.
[IMG][/IMG]
[IMG][/IMG]

[Elias]

ill be posting my pictures toward the end of the week when i get the 8 over tubes from that guy on this thread who was selling them.

[70sironhead]

my 74 I.H. build

Heres my 74 rigid I.H. 1000 with stock rake and 12" over springer with 16"rear wheel and a 21" front wheel......11" from ground,4 " higher in front than the back of frame

[paulw]

This is supposably a 4 over

[psychokat]

So this is my '09 nightster with the ten over tubes. Maybe some of you guys who also have extended 39mm frontends can do me a favor and measure the actual length from top of bottom tree to center line of axle... You see, the 1200N forks are pretty short, so I am basing my 'ten over' status on the length of my stock tubes. I am curious what you guys with other sporty models measure at, if s.one is willing to grab a tape for me... I am sitting at 30.5'' (top of bottom tree to center axle) right now. I suspect that for sportys in general I am actually closer to 8-9'' over??

[Xhane]

So this is my '09 nightster with the ten over tubes. Maybe some of you guys who also have extended 39mm frontends can do me a favor and measure the actual length from top of bottom tree to center line of axle... You see, the 1200N forks are pretty short, so I am basing my 'ten over' status on the length of my stock tubes. I am curious what you guys with other sporty models measure at, if s.one is willing to grab a tape for me... I am sitting at 30.5'' (top of bottom tree to center axle) right now. I suspect that for sportys in general I am actually closer to 8-9'' over??

what company narrow trees are you running, looks killer.

[liquidlife1991]

if I wanted to go over on my forks, I'm thinking probably 6" over, how does it affect trail and what'd do I need to know as far as leveling the bike and wheel sizes? I was thinking a skinny 21" in the front and something a little wide in the back. not sure on the size yet.

[liquidlife1991]

somehing like this. absolutely gorgeous

[Guest]

Here's my Ironhead with stock rake, 8" over tubes - 19" front wheel