T-bars for xs650

Hey guys Im trying to figure out if anyone makes some t-bars that fit the stock xs650 triple trees? If anyones running them, I'de love to see how they look.
-Josh

Plenty of guys on here can do it.

http://www.chopcult.com/forum/showthread.php?t=7338

these are my t bars, i fabbed them upfor my kz. i can make some for an xs also

Hey bikebldr, is that one inch tubing? if so, do you have one inch hand control devices? I always use the stock hand control devices, I will even cut off the ends of the one inch handle bars and weld in 7/8 tubing, just to keep the stock stuff, of course I do not like the stock stuff, I will gut them as much as possible to widdle them down as much as possible, but, that is just me, I just wonder what you would do with one inch controls, I feel as if they are expensive, of course, that is just me, though, please do not get offended

you can always have steffan at www.zombieperformance.com make you some. he has some pretty bad ass stuff. or you can just order a custom setup. just sent him my trees to do some custom riserless bars. and he's in oregon so shipping won't be expensive for you.

I used 1 inch bars on my xs and so far its not to expensive for 1 inch parts. Biltwell throttle, sportster master cyl, etc.

ya they are 1 inch. i fabbed them up on my bender. no risers, they bolt straight to the trees. im running a foot clutch with a jocky shift so i only needed a throttle tube and grips but i got my throttle tube off ebay new for 13 bucks, grips were 21. and a saw 1 inch clutch/brake lever perches for 15 bucks on ebay also.

I hope zombie performance is paying you guys!

These are from craig at front st:

Originally Posted by Blackbetty

I hope zombie performance is paying you guys!

These are from craig at front st:

Oooo I dig those, front st got a shop, site, email, $?
-Josh

man, im digging those front st bars too.

I dig Front St's bars. I like their Monkee Bars myself.

http://frontstcycle.blogspot.com/

Yes, I cheaped out and got raw steel.

Should've got stainless, but my fender struts aren't stainless either so I figured I'd keep the materials the same.

4 weeks and $150 for the bars; mine have 5" of rise with a forward bend.