Founf this on my journeys through the intraweb. For $2 it's better than the expensive kits.
Homemade carb sync tool
Collapse
Desktop Ad Forum Top
Collapse
Mobile ad top forum
Collapse
X
-
Tags: None
-
Founf this on my journeys through the intraweb. For $2 it's better than the expensive kits.
http://www.650ccnd.com/mano.htm -
I guess you could built two and watch them both. I was wondering the same thing about four cyls.Comment
-
-
Comment
-
Built one for my KZ550 by using some hardware store tubing, couple of tee fittings, zipties, 2 stroke oil, and a scrap of plywood I had sitting around. Worked out nicely as the oil really jumps a lot for small adjustments. Probable should give it another check when I get the KZ out this spring. Hardest thing was loading up the oil. I used a tiny 30ml syringe my wife had used to feed some baby kittens she was nursing back to health, worked but took a while to get enough oil moved.
Comment
-
put some old jets in the lines and it'll take some of jump outta that oil. Obviously. make sure you use the same size in each line,Comment
300 mobile ad bottom forum
Collapse
Comment