TECH: Make an Air Suspension Seat

Can you tell me.where too buy the air bags..im gonna make this set up.

That seat is niiiiiiiiice!

you can get the same kinda set-up like the Paul Cox air ride kit off of e-bay. I got 2 airbags , compressor and all fittings and lines for about 350 Bux or so. I just needed to fab up the brackets and mounts.

Here is the link:http://cgi.ebay.com/ebaymotors/AIR-B...ht_2413wt_1167



Makes a big difference in riding a rigid on long trips..

a little update. my set up developed a slight air leak. the air fittings on the stock hd will eventually start to crack. the little plastic lines are junk and my air tank may have had a small leak. i tried tracking it down and finally made some changes.

i have now bypassed my air tank completely. two new 12" grease gun lines

go directly from air bags into a tee with a schrader valve. these line are very strong. something like 3,300 psi.



after a month and 1000 miles it may have lost 1 psi.

nice a sweet comfy ride

hi im from asia, i have a similar kit. i have the mini sleeve and keep losing air. Where can i get these lines online? thank you

Originally Posted by edward

a little update. my set up developed a slight air eak. the air fittings on the stock hd will eventually start to crack. the little plastic lines are junk and my air tank may have had a small leak. i tried tracking it down and finally made some changes.

i have now bypassed my air tank completely. two new 12" grease gun lines

go directly from air bags into a tee with a schrader valve. these line are very strong. something like 3,300 psi.



after a month and 1000 miles it may have lost 1 psi.

this may be it http://www.discountfleetsupply.com/plw10-212.html

thanks man will score a few lines