Show your Home Built Jap chop or whatever

[dubway5887]

I don't think mine is too far off from that thanks to the previous owner, I'm not even riding it currently I just feel it was too unsafe, so now I'm going back and re-doing 3/4's of it and making the best out of nothing. It'll get repainted and rewired after I receive all my parts in, and get everything mounted up and shave off what I don't need!

My some what progress... f*** everyone who watched occ and thought they could do that. Not that I would ever want an oversized bedazzled pos


Delivered by the mail man

[JamesM]

Yeah, steveooohhh- you're going to want to re-do it with some D.O.M. tubing. Also, you have zero bracing going on behind the motor on the frame? That thing is going to break and you're going to die or get fucked up.

[junkyardxl]

Just about every part on this bike is some sort of DIY improvisation due to lack of cash or too much beer. Literally. Shit i found. The center of the frame is 1 1/2" schedule 40 pipe haha. Pipe clamps hold on the tank, which is kindof "frisco"ed . I made the forward controls from stock steel. Those are lawn chair springs holding the kickstand. The front axle didn't fit.. so yeah thats copper pipe shimmed in. Those are protaper motocross triple clamps. The coil is inside the beer can!

Darwin award. Cmon man that's sketch as hell

[steveohhhh]

Its more solid than you think. I know, it was rushed. I'm working on an entirely new one. I rode that thing for a few months though and had nothing but fun. Actually there is a cross piece gusset under the back of the engine with braces bolting to the back . Btw the front axle is pinned, so its not going anywhere. The rest of the frame is DOM , slugged and welded up pert neer good. Learning for the next build- check my thread - doing it up more professional! I'm here for the criticism!

[ironhead77]

[IMG][/IMG]

[ironhead77]

Its Hooot outside in Guam!!!

[IMG][/IMG]

[kzbobber]

Home Built KZ550C Bobber



Here is my home Built KZ550C Bobber

[97sftailtrike]

In the middle of building this 83 nighthawk for my sister

Sent from my SAMSUNG-SGH-I847 using Tapatalk 2

[97sftailtrike]

Sent from my SAMSUNG-SGH-I847 using Tapatalk 2

[KingHerald]

Not sure if my effort is here yet, not finished, but close.







Home brewed rattle can paint job.

[handymancanfixit]

85' Virago 1000, NEED-A-NAME contest..... GO!

How about "LockJaw"

That's what you will get if you crash on it and don't have a Tetanus shot.

Definitely unique and cool!!!

[mothradeath]

heres my kz750 and the build thread.

http://www.chopcult.com/forum/showthread.php?t=32038&highlight=cinderella+pussycrust

http://www.chopcult.com/forum/showthread.php?t=32038&highlight=cinderella+pussycrust

[bobsuruncle]

That is so very cool Mothra

[FelixTheBrat]

Here I got the Lester's ONI just picked up. All clean. Got them for a song.

[uwould]

My xs650

Here is my xs-650 and all the stuff i have done to it.


Fuel:

Soda blasted carbs
Carbs rebuilt by xsjohn
Xsjohn needles
New carb holders
New fuel filter
Tygon fuel line
New OEM brass carb floats
Stainless bolts in carb
New carb kits
New gas cap
New old stock oem petcock
Sight gauge on tank
Brass fuel line T joins carbs
New pod air filters

Brakes:

Rebuilt the front caliper
Stainless steel caliper piston
Braided steel brake lines
New front brake pads
Rebuilt the front master cyl
Drilled front and rear rotors
Gsxr dual piston rear caliper
Gsxr master cyl
New rear brake pads
1 way bleeder valves


Engine:

Rebuilt engine
Bored 1x over
New pistons and rings
New cam chain
New cam chain guide and tensioner
New sump filter
Complete valve job
Bead blast head
Preformance oil cooler and filter
Overdrive fifth gear installed in transmission
1 piece clutch rod
New clutch cable
New exhaust gaskets

Wheels:

Installed new front and rear tires
All new wheel bearings
All new wheel seals
Balanced wheels
New valve stems
Custom rear wheel spacers


Drive train:

New 18 tooth front sprocket
New 32 tooth rear sprocket
New 520 chain
New fork caps
New fork seals
New fork o-rings
New fork dust covers
New fork oil
New handlebar rubber bushings
New handle bar mounts
New handgrips
Ne handlebars
New steering stem bushings

Electrical:

New high output coil
New wires
New ngk plug caps
New capacitator
Permenant magnet alternator conversion
Replaced points with hall effect ignition
New capacitaor (bike runs no battery)
Iridium spark plugs
Led taillight conversion



Leafspring seat
Handmade seat pan
Handtooled leather seatcover
Deep tunnel welded in tank
Ninja ex250 kickstand
Rear brake caliper mount
Remove electric starter
Shaved forks
Handle bars filled with lead shot
Breather dump over chain with one way check valve
Licence plate and taillight mount
Welded on G&L hardtail
Installed gorden scott straight pipes

Left to do:


Chain tensioner
Tidy up wiring
Oil-cooler
Exhaust wrap
Throttle lock