Help, spark plug cap for pamco ultimate kit

[jcap]

Mikes was out of pamco kit I needed so I pieced it together myself. It seems that I ordered the wrong ngk spark plug cap because it does not fit on the ngk iridium plugs. Does anyone know the part # of the correct ngk 5k ohm resistor spark plug cap that works with the ngk iridium plugs in the high output pamco kit? The ones I ordered are LD05F stock #8060 and the terminal on the iridium plugs is too big to clip into the female terminal on the ngk cap.

[section8joe]

I'm not familiar with the plugs you are talking about but the ones I bought from Mikesxs had a terminal cap that I had to take off before I was able to use them.

[MTW]

I'm not familiar with the plugs you are talking about but the ones I bought from Mikesxs had a terminal cap that I had to take off before I was able to use them.

Ditto. You gotta unscrew the resistor cap off the end of the spark plug.

[Billyboy13]

Yeah man, just unscrew the end of the plug

[jcap]

Thanks, that worked....I feel like an idiot I didn't realize the end of the spark plug unscrews