'79 Honda CM400T •*First Built

That tank def fucks with the lines of your bike...it looks like it on backwards IMO. I was dign it up til that point...

are those shocks eye to clevis? ebay specials? What's the length? I like your direction of this build so far, like the pizza pan wheel cover as well!

*edit to say I dig the kicker pedal also!

Shocks are 10 3/8" eye to clevis. They are from ebay. Here is the link

Rebel re pops will ride quite a bit better than those, and cost about the same money.



And the 11" shocks they sell at Dime City ride even better than the rebel re pops



And I'm with LDMC. I dig everything but the tank.



Man... I wish I could have kept mine. These bikes have some good lines for sure.

This is what it was looking like just before someone hit it with a car...IN MY OWN PARKADE!
I'm going to find this asshole and take his first born child!

Originally Posted by MotoBray

This is what it was looking like just before someone hit it with a car...IN MY OWN PACKADE!
I'm going to find this asshole and take his first born child!

Dude, I'm digging the wheel covers. I've got an 82 cm450. I'd like to do the same. Could you post some pics of how you did it? How does it ride with them? Did you use the bolts from the wheel hub? Cheers

I don't really have any pics of how i did the wheels covers. But I can break it down for you.

First go buy a couple of pizza pans. In this case, they are 16" pans. Then cut out a hole in the dead centre to clear the hub. I had a friend who is a machinist cut a 6" hole out. You'll need the bevel that out about a 1/8" to make it fit perfectly to a CM hub.

Then you need to buy 10 self tapping screws. These bad boys are going to drill right into the Honda Comstar wheels. DO NOT take apart the wheel. You'll never get it back together with a pan on it.

Drill some pilate hole closer to the centre of the wheel, but with enough room for the drum brake to clean. Use a drill bit that is small then the self tappers. Then drill the same hole into the pizza pans that are the same size as the self tappers. Then mount 'em!

Thats about it! Paint them or leave then as is. I painted mine a hammer copper colour. You can buy solid pans or perforated.

is all i saw was get a few pizza pans and i knew what u were talking about . this is great. i like the fab keven ones that are rippled but its 140 bucks! im too cheap to buy shit like that

got some sweet z's! I like the look of these bars must better then the keystones.

Originally Posted by MotoBray

I got a S90 tank for a buddy of mine last night. I'm going to do what ever it takes to get this thing to fit.

Attachment 25910

i also assembled the bars. I'm waiting on a welder, so working on the small things right now.

Attachment 25911

Hey man, where did you get the controls from?

i got the controls from the local bike shop. just cheapo MX one.