BBQ whores another bike from Davestune
Collapse
Desktop Ad Forum Top
Collapse
Mobile ad top forum
Collapse
X
-
I wonder if Dragstews will accept a brick of $$ wrapped in a MAGA hat??
Ha ha ha sorry couldn’t “resist” oh jeez no pun intendedComment
-
(I do know where a water hose is at..)
Now if you was in mind of letting go of that pile of green, I can hook you up with building one "Bad to the Bone" Knucklehead.... Less than a 100 miles on it since built..
93" One of the last ones built by Flathead Power with a alternator left side case... AND a Baker ear-ed 4-speed tranny.....
Here's what you would get .......
That's the motor, comes with the Super-E carb, that ign and the charging system ...
Tranny is new .... N1 Lid ..
Throw on Baker's old look ele start primary,
(I'd Have that ^^ puppy Chromed)
Put it all in a Edlund frame and build it up to suit you !!!!!
Sound like a plan ... ???
.../// https://youtu.be/rsbLgRf0gyE \\\...
"Word to the Warning" ... Be very careful listening to me ... !!!
You might end up with a One of a Kind Scoot !!!Last edited by Dragstews; 07-23-2019, 3:46 PM.Take my 45 and outrun em all ..Comment
-
The Baker trans does have a kicker on it ... You could use it, but with it having a ele-leg I don't know why you would want too .... ??
Here's the deal on that motor .... It was installed into a show bike that didn't see much riding at all ...
Was stored for the better part of it's life ... Reason why there is "No-Miles" on the clock ...
The Baker trans has the shift lid and kick cover polished ...
I'll make you a sweet package deal for both items ....
Really would like to see these built into a Ol School looking mean machine that's a sleeper .....
Kinda use most all of the Ol School tricks for looks but still be built with today's parts that far exceeds yesterdays technology ...
Kinda like this trick ....
Buick Fin Alum. Brake drum .... BUT .. !!
Just think about a Ol School looking Knuck that does away with this ....
Just push the button ....
Gotta have a Vard fork for that Ol School look too, ya know ...
Last edited by Dragstews; 07-23-2019, 11:28 AM.Take my 45 and outrun em all ..Comment
-
BTY .......
I was digging on your Idle screw so much that I had to get one for my Super-B ....
Easy Idle Adjustment with that in play ....
________________________________________________
On that note, bushings are installed .....
Here may be an idea that you would want to do ....
Could install that return spring on the throttle shaft ...
Clean up the looks by removing the spring that runs at the side of the carb ...
... Just an idea ...Last edited by Dragstews; 07-23-2019, 5:26 PM.Take my 45 and outrun em all ..Comment
-
-
[ATTACH=CONFIG]95846[/ATTACH]
[ATTACH=CONFIG]95847[/ATTACH]
[ATTACH=CONFIG]95848[/ATTACH]
The Baker trans does have a kicker on it ... You could use it, but with it having a ele-leg I don't know why you would want too .... ??
Here's the deal on that motor .... It was installed into a show bike that didn't see much riding at all ...
Was stored for the better part of it's life ... Reason why there is "No-Miles" on the clock ...
The Baker trans has the shift lid and kick cover polished ...
I'll make you a sweet package deal for both items ....
Really would like to see these built into a Ol School looking mean machine that's a sleeper .....
Kinda use most all of the Ol School tricks for looks but still be built with today's parts that far exceeds yesterdays technology ...
Kinda like this trick ....
Buick Fin Alum. Brake drum .... BUT .. !!
Just think about a Ol School looking Knuck that does away with this ....
Just push the button ....
Gotta have a Vard fork for that Ol School look too, ya know ...
Comment
-
Yes Jesse do the throttle spring conversion and the reason I got that extended idle adjustment because I was always fucking with the idle I would have to turn it down turn it up depending on my throttle bushing leak situation
Thanks for the updateComment
-
Drag, that cheap ass, would give you 500 on thr tranny and 5k on the motor,
You need to whore his panhead motor.
What is the number off the assy line for that fuckle motor.
And by the way that 93 screws. Perfect motor for that trust fund baby....Comment
-
Well Poo ... That Sucks ...
Anywho .... One of you Guys outta jump on my deal here....
And build this into one bad wammer-jammer !!!
Be a hell of a start by having a Flathead Power Knuck motor (#41) that's same as new and the Baker 4-speed ....
Ya know I got another idea that would fit in on this build ...
Being the Baker gearbox is the same design as a Harley gearbox....
Ya could pull the N-1 Ratchet lid off and install a Jock lid then ya could run this on that scoot .....
And Baker makes a killer jock lid ....
(Will need the FL shift pattern for it to work with the Speed-E)
Ol School all the way, maybe y'all can go together on this build
(If ya don't kill each other while it's going together ... Lol)
I can see it now ... "Wild Ol School Chop" built by Two Damn Yankee's with help from a Southern Hillbilly .. !!!
......... ........
Would most certainly be an epic build thread here on Chop-Cult ...Last edited by Dragstews; 08-09-2019, 7:28 PM.Take my 45 and outrun em all ..Comment
300 mobile ad bottom forum
Collapse
Comment