Suzuki Savage/S40

[copterdoc]

My before.

[copterdoc]

And after.

[copterdoc]

Another

[Jasonisdico]

Nope. You'd have to respoke a 21 rim to your hub. The spacing and rotor are odd. Only chance is maybe a suzuki dirtbike. Almost all gs mags fit.

Sent from my backoffbeforeIjackoff

I bet an Intruder 21 bolts up no problem. I know the axles are the same and the wheel fits, just unsure about the brake lining up. Pretty sure it does though. If my savage wasn't so far back in the garage, I'd give it a shot for you.

[Belgianbobber]

This one is mine, hope you like it ...


greetz from Belgium

[bluesrock]

Check into a Suzuki Intruder 800 front end, I hear they bolt right up to the Savage.

[Jasonisdico]

Check into a Suzuki Intruder 800 front end, I hear they bolt right up to the Savage.

Yes, the entire Intruder front end bolts up easy, BUT the savage front end is so much cleaner looking.

[rextec]

Heres my shredder! Fun bike for sure.

[RyleeonDemand]

my 96 Savage. RYCA hardtail that's been modified and welded on. Lots of work on this bike over the past 4 months. Ive been slowly changing it over to a Japanese bobber style build. Low, narrow and long. Still a long ways to go though.

Seems like most of my pics the bikes on the lift more than the ground!

[copterdoc]

Swapped sides in the exhaust

[Hammytime]

I've wanted one of these bikes for a long time. I can't seem to find a good deal at the right time here in STL.

[copterdoc]

Keep looking got mine for $800 with 5200 miles 2000 model

[zenolucha]

I know this is forever old but an? Intruder should be a drop in.

[GnG]

i just picked one up for cheap and will post pics..

[sandmanred]

beer budget boardtracker

Picked up a 98 this spring. Been working on the front end first. Still lots do but this is it so far. Never built a girder before. Next is some better mirrors and finding better routing for cables.