02 sporty complete rewire help, input, opinions??? help

So guys I am in the middle of a s*!T storm Help help help. Lets see where to start. about 2 months ago I got my tins painted I decided to cut all the wire connectors and tuck the wires under the tank. so I did that with no problems everthing was cool. then I wanted to take the speedo out so I did and the speedo harness. including that light from the speedo. so not my wiring harness is in shambles and i fried my stock ignition module, two wires thouched that were not suppose to - _ -. and now I got a Hi-4 dual fire, installed and i cant get the thing to turn over. So im not at the point where I want to ditch the stock cut up harness all together and just rewire it so all I have running is the engine head light, turn sig, and tail light. thats all I need and all I want. I am going to buy some wire and just make a new harness from scratch, iv seen some posts about this already I just need a bit more clarification maybe some of you guys can help me out???

First the starter button can you guys expand on that,

next the circuit brakers where can I buy them

Then putting it all back together, its an 02 xlh nothing fancy just standard bike you think any of you guys can help me draw somthing up for, a diagram you all already have?

As far as taking the controls out from the handle bars where can i wire them up to, I know I have to leave the turn sigs there but the start I want to move the kill switch i can ditch, the horn I cant ditch, the Light I wanna move( i seen where some one moved it to a toggle switch and mounted on the frame)

If im missing any other information let me know

by the way this is my first post so sorry for making it a long one and, Thanks chopclut guy appreciate it

this sounds like a job that would be made much easier if you got a manual.

Here's a long ass write up I did on an '02 "S" Model. It had a stock ignition module, so that is different from what you are doing, but the Hi4 will be even easier. You can follow the diagram I did for the rest of it. Put a push button starter on the end of the solenoid and circuit breakers or fuses wherever you want (I like the little triangle cover behind the battery). If you remove the VOES you will need to replace your petcock or flip the diaphram around so fuel comes out without having any vacuum.


http://www.chopcult.com/forum/showthread.php?t=12086

Also here's a couple diagrams that you should be able to glean what you need from.

Thank for the info billdozer, I still have a question that needs answering. As i said i want to gut all the wiring and everything in it, but i need to keep my brake lights and turn signles but where or what kind of circuits do I use for keeping the flashers going. should i keep the stock flasher or what did you do?

Can anyone answer a few questions about this diagram.

The wires from the ignition say pink and white, with Blue and Violet not used.

I have a Bk/Wh, Pink, V/WH, and BK coming from the ignition. Which wires go where exactly? (from ignition to coil)

Also I see the wire tied into the White from the ignition switch, Whats the best way to tie the White and power wire into the coil

Originally Posted by shredzorv2

Can anyone answer a few questions about this diagram.

The wires from the ignition say pink and white, with Blue and Violet not used.

I have a Bk/Wh, Pink, V/WH, and BK coming from the ignition. Which wires go where exactly? (from ignition to coil)

Also I see the wire tied into the White from the ignition switch, Whats the best way to tie the White and power wire into the coil

What ignition are you useing?

Billdozer's diagram is for a dual fire/single coil application. Had it been single fire/ dual coil the blue wire wouldve been used on the second coil. the violet wire is for a tach.

I have a stock 99 sportster 883 ignition. The wires I have coming from the ignition are P, Wh/bk (which go to the coil) V/Wh , Bk, Gr. Im assuming the black gets ground, but I'm not sure about the green, and V/Wh wires.

Also which wire into the coil (P or W/Bk) do I tie the ignition switch into?

I hope that's enough info
Thanks for the help.

I think the best thing to do is trace your own wiring and see what wire colors correlate to what components they run to and ignore the color coding on Bills diagram but use it as a guide. I don't have a sporty so I can't relate directly to your headache but I'm chasing some gremlins in my Gyna's wiring caused by an aftermarket module that converted my rear signals to brake/turn lights that's shit the bed and caused some other problems. With the 100 mile ride to work I don't have time to dick around with things on a complete rewire while and use the truck at almost $5 per gallon. If you've got the time, tools, parts and know how to do it right then gut it and go for broke and start from zero that way you know it's done right.