CHOP CULT HOME
Email Password
Search

Search Forums:

Type: Posts; User: Sky

Page 1 of 20 1 2 3 4

Search Forums: Search took 0.31 seconds.

  1. Thread: Odd tuning issue.

    by Sky
    Replies
    23
    Views
    479

    It was suggested but, You didn't say if you made...

    It was suggested but,
    You didn't say if you made sure the accelerator nozzle o-ring is in place...

    How many turns out is the mix screw?


    What air bleed # are you running?
    You probably want a...
  2. Replies
    85
    Views
    3,431

    Has anyone mentioned drilling a hole in the...

    Has anyone mentioned drilling a hole in the throttle plate?
    Sometimes necessary with a lumpy cam...
    Car guys with Hollys do it all the time.
    What cam are you running again?

    Air bleed shouldn't...
  3. Replies
    43
    Views
    1,450

    Starts easy + Locked advance = might just be...

    Starts easy
    +
    Locked advance
    =
    might just be a tad retarded at higher rpms

    Is OP tuning a Knuckle like it's a Flattie?
  4. Replies
    43
    Views
    1,450

    Look at the plugs like tattoo suggested. You can...

    Look at the plugs like tattoo suggested.
    You can read timing on the plugs too.
    Are you running a fixed ignition? Or auto advance?
  5. An SU is a period correct "CV" The eliminator II...

    An SU is a period correct "CV"
    The eliminator II version is what you want.
    You will need the SU manifold in air cleaner as well.

    We are all assuming the OP has a stock displacement 74" slab...
  6. Replies
    6
    Views
    395

    Note: This bracket is meant for a four speed...

    Note:
    This bracket is meant for a four speed style clutch cable. (Adjuster's at the end of the cable, not the middle)
    Four-speed style clutch lever/perch is preferred.
    But you can make a 4-speed...
  7. Thread: Oil tank how to

    by Sky
    Replies
    4
    Views
    315

    Metal supply houses like Grainger... Keywords; ...

    Metal supply houses like Grainger...
    Keywords;
    hemispheres
    And
    steel floats
  8. Replies
    85
    Views
    3,431

    As JB stated, the B has no accelerator pump. ...

    As JB stated, the B has no accelerator pump.
    It's a "roll on" only carb.
    But that can be changed...
    I'm a fan of the "super bowl" but not a fan of the Bendix style plunger it uses.

    Tune the...
  9. Replies
    2
    Views
    153

    You'd be surprised how much oil the road grime...

    You'd be surprised how much oil the road grime under even the cleanest bike can hold.
    A weep under a Harley will barely be noticed.
    Keep an eye on the level before you tear things apart

    That...
  10. Replies
    7
    Views
    467

    Put a real rear fender on it first Castration...

    Put a real rear fender on it first
    Castration would be a real bummer

    Yes it should bolt right on
    Measure bottom tree to axle lengths and compare

    Buddy of mine got bounced out of the saddle...
  11. Replies
    30
    Views
    26,432

    Options Somebody did The voes can be left...

    Options

    Somebody did

    The voes can be left hanging but not wired in

    Several aftermarket ignitions utilize a VOES

    Pretty sure the stock 98 Softail cdi box had dead revs, but maybe not
  12. Replies
    15
    Views
    988

    Different materials expand at different rates as...

    Different materials expand at different rates as temperatures rise.
    Some leaks even go away as the bike warms up.

    Throw an eye on vacuum lines too

    Confirm fuel delivery, inspect gas cap to...
  13. Thread: Millwakee 8

    by Sky
    Replies
    2
    Views
    302

    Acquire a set of head gaskets for both motors...

    Acquire a set of head gaskets for both motors
    (Used would be free)
    Compare the two
    Let us know what you find
  14. Replies
    17
    Views
    499

    Use the stock mechanical front linkage and...

    Use the stock mechanical front linkage and crossover.
    Mount a master cylinder on the left side.
    Inside the primary maybe?
    Use the stock tool box mounts?
    Hide it inside a tool box ?
  15. Replies
    7
    Views
    373

    Oh shit, Jim has a great point! If the tire...

    Oh shit, Jim has a great point!
    If the tire needs a tube, it'll say right on it.

    Some early mags need tubes too. They say "tube type" cast right into them.

    "Tubeless" just means it CAN be run...
  16. Replies
    4
    Views
    353

    Nope, you can't swap floats and float bowls...

    Nope, you can't swap floats and float bowls around.
    Gotta stick with the same style the carb came with.
    Floats will stick in "wrong" the bowl and the bowl o-ring won't match up to the body.
    As...
  17. Replies
    7
    Views
    373

    Yes, you can put a tube in almost any rim/wheel. ...

    Yes, you can put a tube in almost any rim/wheel.
    However due to friction/heat, the speed rating on the tire is reduced by %10 or something.

    Be aware that you cannot plug a flat with a tube in...
  18. Replies
    30
    Views
    26,432

    I'm going to have to disagree with Tattoo on this...

    I'm going to have to disagree with Tattoo on this one "point".
    Points are great, but try finding a dual point set up for a Harley. (Dual points = single fire) (single set of points = dual fire)...
  19. Replies
    123
    Views
    7,458

    Suzuki gauge looks great in there! The rest of...

    Suzuki gauge looks great in there!
    The rest of your proportions are a little wonky.
    That's a small bike.
    All that fuel is unnecessary and quite frankly going to be top heavy (when full) for the...
  20. Replies
    14
    Views
    890

    Looks like you've got plenty of cable to go...

    Looks like you've got plenty of cable to go taller.
    Try the longer risers first
    Low rise "super bars" are a close look to the drags.
    You could go tough guy with some pulback T bars once you know...
  21. Replies
    26
    Views
    1,068

    Unless I missed it... nobody mentioned squirting...

    Unless I missed it...
    nobody mentioned squirting some oil into the spark plug holes.
    To make sure the rings have some oil on them before starting or even attempting to turn it over
  22. Not sure exactly what your asking here Doug Did...

    Not sure exactly what your asking here Doug
    Did you mean to post this in the Brit bike section?
    I think the 39mm Harley front end on a triumph is definitely an upgrade.
    Better match visually than...
  23. Replies
    12
    Views
    761

    [QUOTE=EASYGEAR;845123]. As said, i am...

    [QUOTE=EASYGEAR;845123].

    As said, i am interested in details on what they changed on the carb aside black finish and name, if there is something . Or an exploded view about it, if somebody...
  24. Thread: Kickstart issue

    by Sky
    Replies
    15
    Views
    613

    It had compression before the clutch work, right?...

    It had compression before the clutch work, right?
    Check for clutch slippage

    Been sitting?
    Check the jets aren't clogged
    and fuel is fresh

    Not sure it has fuel in the bowl?
    Look in the bowl...
  25. Replies
    7
    Views
    301

    Single fire right? Pics will help How are you...

    Single fire right? Pics will help
    How are you checking for spark?

    This should be dead simple.
    12v from ignition switch to the coil.
    Power wire to the ignition module on the same lug of coil....
Results 1 to 25 of 500
Page 1 of 20 1 2 3 4

Log in

Log in