Search Forums:

Triumph Factory Workshop Manual, 1956-1962 pdf copy, includes T110:

http://www.classicbike.biz/Triumph/Repair/56-62Triumph.pdf

BCS:

604 Davison Street, RR3 Wolfville, NS, Canada, B4P 2R3, Tel: (902) 542-7478
&
50 Connecticut Road, Loring Commerce Centre, Limestone, ME, 04750, Tel: (201) 880-0366
...

these guys are not on east coast, but may be worth a look:

DESIGN & BUILD
"Handcrafted Racing Machines"
109418
"Alp hit 175.625mph on his Pre-Unit Triumph today. That's just
outrageously...

didn't notice till you said - in Canada - can go the British Cycle Supply in Nova Scotia for that unit or others:

109416
BCS #631-04 Oil-In-Frame BSA & Triumph & BSA Type
All Types take the...

yup, that's it...see the mounting installation done on Nortons in that Norvil link. Yes, mount it in any inconspicuous place you can on your chop...ain't gotta be ugly.

you posted at the same time as me...see pics above.

not always:

109412

109415

109413

109414

Norton Commando External Oil Filter Mounting Head

This Mounting Block will allow you to adapt the "Spin On" Oil Filter just like Automobiles making your Oil System far better then it ever was!...

This the fender you want right? from the link you posted. That a typical HD softail frame?

109399

That Sportster carb probably just needs a good cleaning to get that gummed up gas out of the orifices and jets; a couple examples of a carb cleaning how to:

How To: Harley Davidson Sportster...

not brass, but bronze;

"C932 Bronze | SAE 660 | C93200 (SAE 660) High Lead Tin Bearing Bronze is our most popular alloy.

C93200 Bronze is a general purpose bearing alloy possessing good...

have you considered Scissor Springs?

109273

"The 3" Scissor Springs are recommended:

If you want the rear of the seat to sit higher
If you are doing a custom build where you need...

looks like the spacing is not right on those 6 bolts; the one at the 9 o'clock is centered with the carrier, then others are offset.
Can you just get a 10" diameter rotor to fit the 4 mounting...

how about posting a couple photos to help identifying.

found this:

Harley-Davidson OHV Engine Displacement
To use this Chart
1. Find your bore size in Column 1.
2. Move right to Column 2 to the exact size for boring (decimal)
3. Select your...

It looks like in your pic, you are gonna weld a tab to the frame for the caliper to sit on, nothing to actually hold the caliper - I don't like it.

Can you swing the caliper around so it sits...

Thanks for that;

https://thehoglegend.com/news-magazine-articles/

Desmohog; Ducati 900ss heads on Evo bottom at Crossbreed Cycles:

109168

109169

109170

http://crossbreedcycles.net/home--contact.html

Note the bottom spring seats over the lower spring perch, and how the radius is inside the top of the front legs at the lower spring perch - it is a Jammer springer:

109125

109127

Worth...

what is it you are looking to find?

As MOTher noted above:

Disc Rotor Spacer
".040" thick spacer is used to re-establish correct rotor-to-caliper alignment and spacing when ever servicing wheels, brake calipers, supports or rotors...

how about a pic of the whole frame. is it a softail?

The end of that red wire at your points looks sloppy; kinda bare and scraggly - is it making full contact with the points? does it need a new connector on there to ensure positive connection?
that...

Sportster neck gusset removal?

https://www.jockeyjournal.com/forum/showthread.php?p=882237

Saw this 2002 Sporty neck stripped on a JJ thread:

109104

109105


As Jim noted; back in the '70s, Santee was one company that made hardheads to stretch and rake neck:

109106