CHOP CULT HOME
Email Password
Search

Search Forums:

Type: Posts; User: travisbickle

Page 1 of 2 1 2

Search Forums: Search took 0.02 seconds.

  1. Pulled the kicker cover off and found this: ...

    Pulled the kicker cover off and found this:

    103926

    103927

    103928
  2. HELP: Trying to identify this sound that killed my bike...

    Everything was going fine, then as I started pulling on the clutch I was hearing this weird noise, then it got worse then so bad (grinding sound) I pulled over, turned bike off and that was it,...
  3. Changed the plugs , added some sea foam in the...

    Changed the plugs , added some sea foam in the tank (did wonders for my old ford)... seems to be running smoother now, still gonna add a fuel filter and give the carb a clean... cheers
  4. i have, the only thing i can think is that the...

    i have, the only thing i can think is that the tank is old, the petcock is old and there is no fuel filter so there may be a clog in the petcock... but before i start anything just wanted to see what...
  5. stock ignition

    stock ignition
  6. rear plug 96770 front plug 96771

    rear plug

    96770

    front plug

    96771
  7. 89 Sporty Sputtering Help Please (Video Inside)

    Just finished getting my wife's 89 sporty back together, new everything, plugs, wires, coil, seals, carb was cleaned and rebuilt etc etc etc...

    Was running great for a about a week then she...
  8. Brooklyn Invitational??? Can't find info if it is or isn't happening....

    Anyone know what's up? thanks
  9. 1989 883 Xlh sportster Kit was bought off of...

    1989 883 Xlh sportster

    Kit was bought off of amazon, was advertised (and reviewed) to fit that model.
    Iíve sent an email to the seller asking for install instructions, havenít heard anything...
  10. Speedo relocation fitnent issue, anyone dealt with this?

    Trying to figure out how this is supposed to work, the Speedo housing wont fit in the relocation kit, the Speedo itself has no backing to tighten to, and Iím all out of ideas... anyone? Cheers...
    ...
  11. Thanks for the reply, I'm pretty sure after I...

    Thanks for the reply,

    I'm pretty sure after I rebuilt the top end a few years back I used a couple nuts that I knew lacked end play (acorns) and meant to replace, I'm an idiot with a short term...
  12. Help.. Oil leaking from rocker and then I noticed this... (pics)

    Looks like I lost an acorn nut and both sides have been leaking a good quantity of oil...
    Wondering the best way to handle this from here, just get another nut and tighten it up or???? .... thanks...
  13. ***update***

    So i did the leak down test, couldn't detect anything, did another compression test after 20 minute idle, got 120psi front and back.

    Decided to pull the carb and inatke off and saw this pool of...
  14. thanks dudes, my buddy and i are gonna run a leak...

    thanks dudes, my buddy and i are gonna run a leak down test tomorrow and see whats up....
  15. did the compression test, throttle wide open,...

    did the compression test, throttle wide open, getting 90psi front and back....

    checked the plugs after short idle, front plug definitely looks like shit compared to the rear, in fact the center...
  16. Dyna s single fire electronic ignition

    Dyna s single fire electronic ignition
  17. Popping out the exhaust on my Shovel... wtf?

    Any thoughts as too why I'm getting this popping out my exhaust?

    Also my front cylinder is hot as fuck while the rear seems normal, I've checked pushrods, plugs, wires, no intake leak, exhaust and...
  18. Replies
    145
    Views
    121,805

    Stock Rake, 6 over 41mm from end. 76019

    Stock Rake, 6 over 41mm from end.

    76019
  19. 90% done now, this is a stock frame with 6 over...

    90% done now, this is a stock frame with 6 over 41mm tubes.


    75702

    75705
  20. stock frame , stock rake in the trees, Should...

    stock frame , stock rake in the trees,

    Should have it all back together this week ill post more pics when its done
  21. I decided to run my old ones, these are 41mm...

    I decided to run my old ones, these are 41mm tubes and measure 28.75" in length on my FL.

    7482674827

    Not sure why that first one loaded sideways, it is right side up on my computer.
  22. Only gets more confusing....

    So what I can gather from the internets is:

    The stock length of a 1980 FL 41mm tube is 20.75".

    The stock length of a 1980 FXWG 41mm tube is 24.75".

    The tubes from J&P #230-575 measure...
  23. Why are my 4over tubes longer than these 6over ones?????

    So I was running the J&P cycles 4 over fork tubes for my 1980 FL Shovelhead Part Number: 230-575 , they claim to measure 24-7/8th".

    I wanted to get a set of 6 over tubes, which I ordered from...
  24. Replies
    497
    Views
    97,139

    Super slo mo chopper riding on the way to born...

    Super slo mo chopper riding on the way to born free......



    https://www.youtube.com/watch?v=gs-_bRy2XYs
  25. Replies
    497
    Views
    97,139

    https://vimeo.com/173734928

    https://vimeo.com/173734928
Results 1 to 25 of 43
Page 1 of 2 1 2

Log in

Log in