CHOP CULT HOME
Email Password
Search

Search Forums:

Type: Posts; User: MIKE47

Page 1 of 15 1 2 3 4

Search Forums: Search took 0.01 seconds; generated 46 minute(s) ago.

  1. Replies
    12
    Views
    815

    But those 1" stem bikes are more expensive. HAHA...

    But those 1" stem bikes are more expensive. HAHA

    Much like anything else, the most common stuff is cheaper than the most uncommon stuff. those xls used those bearings for like what? 3 or 4 years?...
  2. Replies
    4
    Views
    546

    There's an automotive tool I use for this. It...

    There's an automotive tool I use for this. It looks like a screwdriver. It has a slotted end. You slip it over the long straight section and tension the end up with the handle. It basicly pinches the...
  3. Replies
    12
    Views
    815

    supply and demand? plenty of 1" stuff out there....

    supply and demand? plenty of 1" stuff out there. not so many 15/16. You can surely try a bearing deport and see if you can get them cheaper. This is what I show for them. Thats all I can do for you.
  4. Replies
    12
    Views
    815

    I just checked my suppliers inventory a pair of...

    I just checked my suppliers inventory a pair of 15/16 timken bearings for that bike are $50 + plus shipping. Thats just bearings. If you want them call me at the shop tomorrow 908-526-8865. I can get...
  5. Replies
    10
    Views
    2,532

    Its your call on what you think is right. And I...

    Its your call on what you think is right. And I applaud your concern for the rider's safety but IMHO that thin wall isnt going to make any difference. It has the entire 5/8" axle supporting it inside...
  6. Replies
    17
    Views
    1,220

    First inspect for damage to wiring. I am assuming...

    First inspect for damage to wiring. I am assuming you already did but being freshly reassembled maybe something went back together differently of got pinched in assembly? iff all good then charge the...
  7. Replies
    17
    Views
    2,328

    look in the blog dump directory for 47...

    look in the blog dump directory for 47 industries. Click and the first thing you'll see is a evo we did a little while back.
  8. Replies
    17
    Views
    2,328

    Not trying to knock Tigman out of the game but...

    Not trying to knock Tigman out of the game but I'll throw it out there that I do softy frames with factory pan-style axle plates. They work well with factory frames. Not the cheaspest way to do it...
  9. Thread: spinger axle ?

    by MIKE47
    Replies
    11
    Views
    1,178

    vtwin part number 44-0752 is what you want. It...

    vtwin part number 44-0752 is what you want. It goes in from the l/s (opposite what a stock axle does) it has the register size for the larger hole under the head, then is 3/4 across the center and...
  10. Thread: spinger axle ?

    by MIKE47
    Replies
    11
    Views
    1,178

    Your springer isn't the issue thats the way its...

    Your springer isn't the issue thats the way its supposed to be. Picture of the other side please? Are both ends threaded with nuts like this side?
  11. Replies
    7
    Views
    773

    What sky said would be an easy test. Pull the...

    What sky said would be an easy test. Pull the wire off and see if the light is till on? If it is look for a pinched wire. Do any work lately? maybe you pinched a wire under the dash? I'd do a gauge...
  12. Thread: Wheel

    by MIKE47
    Replies
    7
    Views
    858

    That is not right. Looks like you need to cross...

    That is not right. Looks like you need to cross more spokes also the way those spokes aren't hooked at the hub is not right. Being you have too long I'm guessing you need to go back to the first set...
  13. Thread: spinger axle ?

    by MIKE47
    Replies
    11
    Views
    1,178

    Mike, If that is the typical repop axle with head...

    Mike, If that is the typical repop axle with head on it from v-twin in straight 3/4 it goes in starting from the larger side (left side when seated on the bike) there is a stepped section under the...
  14. Replies
    11
    Views
    1,154

    cut a half moon plate from 5/16" thick steel that...

    cut a half moon plate from 5/16" thick steel that will bolt to the mount and go around back of the post. Bolt it on and transfer the oil tank bolt pattern to that half moon. Drill and tap to 5/16-18....
  15. Replies
    11
    Views
    1,154

    Your oil tank mount was welded onto the front of...

    Your oil tank mount was welded onto the front of the seat post instead of the rear of the seat post. Cut it off and swing it around back. If you destroy it in the process you can get another one from...
  16. Replies
    91
    Views
    15,408

    Great Job Nick!!! So Awesome to se it all...

    Great Job Nick!!! So Awesome to se it all together. I'm really happy to know you are happy with what we provided and we are proud to have been involved. Now Ride!!!
  17. Replies
    14
    Views
    1,646

    Stainless isn't really all that much harder. It's...

    Stainless isn't really all that much harder. It's actually gummier. You want to be turning very slowly. I start all holes in tubing with a center punch then starter bit as a normal point will roll...
  18. Replies
    2
    Views
    966

    If I'm right that has a rear disc. I would think...

    If I'm right that has a rear disc. I would think relacing to a 16 hoop is the easiest way to solve the issue so as not to worry about axle diameter, length, and other differences that would need...
  19. Not all 36 hoops are drilled the same. You will...

    Not all 36 hoops are drilled the same. You will want the hubs to be similar in diameter as the hoop is drilled at an angle. The steeper the angle the larger the hub diameter needs to be to get the...
  20. The 16" harley rim on a cb hub is to be done on a...

    The 16" harley rim on a cb hub is to be done on a cb750 hub. Those 750s are 40 spokes. I don't think there is anyway you could ever lace a 40 spoke hoop to a 36 hub. Skipping holes would result in...
  21. Replies
    148
    Views
    14,630

    Not sure of a departure time yet but I will be...

    Not sure of a departure time yet but I will be riding the death trap with the snapped frame once again.

    I will gladly host a meet up spot at the shop and drag a group of guys on the backroads...
  22. Replies
    148
    Views
    14,630

    Of course I am.

    Of course I am.
  23. Replies
    92
    Views
    8,232

    "hi, welcome to the junk pile. You come here...

    "hi, welcome to the junk pile. You come here often?"
  24. Thanks to everyone that came out to the show. It...

    Thanks to everyone that came out to the show. It was great to have you all in our shop. I will post more soon.
    Here's a few
    ...
  25. Thread: NYC 33rs ???

    by MIKE47
    Replies
    46
    Views
    5,102

    FDR PARK. Franklin Delanoe Roosevelt Park. Right...

    FDR PARK. Franklin Delanoe Roosevelt Park. Right near the stadiums. The park is right under The Rt.95 overpass.
Results 1 to 25 of 366
Page 1 of 15 1 2 3 4

Log in

Log in