Search Forums:

Hang on with the whole taking the clutch apart for a sec.

Take off the primary cover (Make a note of which bolts go where). They are not the same length all the way around

With the cover...

A rod is really overkill and adds to clutter. That caliper has a slot in it that slides over the tab Thats how they are from the factory, no rod. As long as the tab is of good gauage and the...

Just be sure the tab does not bind the caliper at the disc, and that you can easily slide the caliper back and forth, and you have enough tab lenhgth for chain or belt adjustment

Yes it will work Done it myself a few times with a tab just like it

The answer key is what you said: You have seen neither in person.

There are three old sayings in bike buying:

There is no such thing as a complete basket case, a partial built bike that...

Myself, there are two serious issues with so called skate shoes (or the like) while riding bikes

1. You go allot faster on a bike

2. Petroleum residue on the roads will turn these type of...

The reason I ask is if the surface that got damaged happened quickly, its probabaly just a spray can applied paint job that can be easily fixed

Where is the prob, can you send a pic? Also, was this a factory finish or aftermarket/prior owner apply the paint?

Yep Same Superior

I remember cycle shack

Here's a question: Did cycle shack actually make those pipes? I doubt it. If if not, who did, and can they be gotten form the folks that actually make them.

Remember...

I use a old style wagner pushing my 90's softail rear caliper. Works great. See my 60FL. I used the same setup on a prior build Cheap and works fine108320

The 883 EVo 4 speed SAVED HD I beleive it cost $3995 when it first came out (1989?). I went out and got one. EVO reliability and the price made a new HD affordable to the average person. I...

Damn good prices on quality produtcs. I have yet to be dissapionted. FAST shipping. I just wish they had lots more parts!

Hit me with a make/model cam for better mid range for a 60FL

You aint gonna like this............ Whether you agree or not with the laws, or think no one will ever notice: The jailhouse is full of guys that had that same thought. People say they reason...

There is NOTHING wrong with what you have. The are SUPER easy to install (If you have a make that doesnt require removing the front head to install) There is only one item you need to look at in...

Thats great to hear. E probs can be tricky to nail down, especially when there is more than one issue causing the probem like yours.

You have tried just about everything at this piont. So try this one: Be SURE the bulb is inserted the correct way. I know it sounds crazyn, but there is a reason I say check it. Its easy to...

Thanks 69 Glide: Keep posting that kinda info: Someone I am very sure can and will use it THATS WHAT THIS FORUM IS FOR

I agree with JB Check the easiest and cheapest items first: IMHO

Check in line fuel filer (If you have one)

Check petcock screen

Check to ensure you are chrging your battery while riding ...

JB

So lets say I take this set up that you see, and remove the inner and outer primary, and want to run a open belt drive with a bearing support, with no e start: Can I use this same basket...

Let me clarify then: I get you dont need a e start to run the basket pictured, The e start is not part of the problem

What I dont get: If the clutch basket we see is a electric start basket...

Meant to add: Take what you have with you to the shop and let them work it out

I get the question: EVERY time I set up a used brake system, the dif fittings, etc, really fucks my mind up. Heres what I do. I go to my local indy dealer with what I have and let them figure...

Can you ID this transmission?

I'm a little confused. This is a build that I came up on, with very little history. The engine is a 74 Shovel. I was told this build never had the electric...