Search Forums:

Damn. So how do I tell what size banjo bolt I have now? (I'm sure its metric)

What is measured on the bol to detrmone the size?

So I see 10, 11 and 12mm banjo bolts out there. What is measured to determine what banjo bolt size I have? Is it the size of the socket that fits it?

I agree. Seen it on dirt bikes and Bts. Culprit is typoically a combo of leaking petcock (or petcock left on), with a dirty float/needle, as JB stated.

Before you tear into your bike, drain...

It aint the synthetic Drop that thought and look elsewhere

Man, I gotta turn the crowd on to these things

I'm currently using three of these. One on my Pan, one on my 5K generator w/e start, and one on my 67 FJ. I jam in very long and isolated roads. ...

I did it on a 99 sporty, and a kick only 97 BT Evo. Both ran fine, easy install. The BT evo was WAY easier to kick start. The sporty, to set the points, just remove the plugs, and put the bike...

Take your bike to your local indy shop and have them take a look. My only other recommendation is DONT take short cuts. Thats how you loose your bike and go to jail. Besides, how can you really...

Glad you could help The issues I had with post is the first I have had with 3 units I have had in the past. It really is a very easy install, and the trouble shooting guide is very helpful in the...

Dont worry about the initial advance or retard settings when setting it up the fiirst time If you do, you will encounter nothing but probs. Set it up exactly as the instr states. It will be very...

Take it easy on the "laughed at" sporsters. Comments like that dont get you far here or in the real world. A sporty was good enough for you in the past: Sporties saved HD (and Pres Reagan) in the...

Hang on with the whole taking the clutch apart for a sec.

Take off the primary cover (Make a note of which bolts go where). They are not the same length all the way around

With the cover...

A rod is really overkill and adds to clutter. That caliper has a slot in it that slides over the tab Thats how they are from the factory, no rod. As long as the tab is of good gauage and the...

Just be sure the tab does not bind the caliper at the disc, and that you can easily slide the caliper back and forth, and you have enough tab lenhgth for chain or belt adjustment

Yes it will work Done it myself a few times with a tab just like it

The answer key is what you said: You have seen neither in person.

There are three old sayings in bike buying:

There is no such thing as a complete basket case, a partial built bike that...

Myself, there are two serious issues with so called skate shoes (or the like) while riding bikes

1. You go allot faster on a bike

2. Petroleum residue on the roads will turn these type of...

The reason I ask is if the surface that got damaged happened quickly, its probabaly just a spray can applied paint job that can be easily fixed

Where is the prob, can you send a pic? Also, was this a factory finish or aftermarket/prior owner apply the paint?

Yep Same Superior

I remember cycle shack

Here's a question: Did cycle shack actually make those pipes? I doubt it. If if not, who did, and can they be gotten form the folks that actually make them.

Remember...

I use a old style wagner pushing my 90's softail rear caliper. Works great. See my 60FL. I used the same setup on a prior build Cheap and works fine108320

The 883 EVo 4 speed SAVED HD I beleive it cost $3995 when it first came out (1989?). I went out and got one. EVO reliability and the price made a new HD affordable to the average person. I...

Damn good prices on quality produtcs. I have yet to be dissapionted. FAST shipping. I just wish they had lots more parts!

Hit me with a make/model cam for better mid range for a 60FL

You aint gonna like this............ Whether you agree or not with the laws, or think no one will ever notice: The jailhouse is full of guys that had that same thought. People say they reason...