CHOP CULT HOME
Email Password
Search

Search Forums:

Type: Posts; User: EeeasyTiger

Page 1 of 2 1 2

Search Forums: Search took 0.01 seconds.

  1. Rejected the carb back down. Didn’t run it with...

    Rejected the carb back down. Didn’t run it with the lower jets so those pics are from the rich jets.
    Was also getting ready to pull the rear wheel and try and get my rear caliper aligned better. I...
  2. Here’s the plugs with .33 and .76 97036 97035

    Here’s the plugs with .33 and .76
    97036
    97035
  3. @tattooo I’ll pull them Monday and post a pic. ...

    @tattooo I’ll pull them Monday and post a pic.
    @farmall yeah I’ve got an adjustable support that bolts to the case stud in the center
  4. Solved! @dragstews had it right from his first...

    Solved!
    @dragstews had it right from his first guess.
    I checked everything I could think of and after talking with an old wrench at my work he suggested playing with timing while it was running....
  5. I think tattooo has it on this one, it looks like...

    I think tattooo has it on this one, it looks like a fuel delivery issue. Jets are .32 and .76 but my plugs are oddly light. Compression hot is 100 which is at the minimum of factory spec so off with...
  6. @tattooo I’ll do that on Monday, two jobs and it...

    @tattooo I’ll do that on Monday, two jobs and it being my only ride means it’ll have to be a day off deal.
    @farmall that is one thing I haven’t done. When she cools a little tonight I’ll pop the...
  7. https://vimeo.com/359451598 video of it idling...

    https://vimeo.com/359451598 video of it idling then randomly cutting out while it’s still hot
  8. Shovelhead wonít idle, recent development

    80Ē shovel. Been my daily for about 4 months. Was running great until recently. Now she wonít idle under 1100ish rpm without dying hot or cold. Runs perfectly fine off idle and cruising.
    I can hear...
  9. Replies
    15
    Views
    560

    No leaks and it’s been running perfect ever since.

    No leaks and it’s been running perfect ever since.
  10. Replies
    15
    Views
    560

    I got it working with the accel pump side...

    I got it working with the accel pump side slightly loose. Gonna run it for now as is cause my pockets aren’t deep enough to keep the two bikes I have perfect. The price you pay for having one Harley...
  11. Replies
    15
    Views
    560

    I’ll call them again but they didn’t sound very...

    I’ll call them again but they didn’t sound very helpful last time I spoke with them. Sucks that people aren’t honest cause I messaged the guy I got it from after the fact and that’s when he told me...
  12. Replies
    15
    Views
    560

    Ok so I got the carb off and my best guess is the...

    Ok so I got the carb off and my best guess is the bushings aren’t straight. Even without the butterfly in there it’ll bind. So I guess I should have just spent the extra $100 and gotten a good one...
  13. Replies
    15
    Views
    560

    I’ll pull it off tomorrow morning and double...

    I’ll pull it off tomorrow morning and double check. And post some pics too.

    @shank1kole it’s a brand new butterfly but I’ll look at it closely and see if it or the throat has any imperfections.
  14. Replies
    15
    Views
    560

    I tested it with the carb off the bike, after I...

    I tested it with the carb off the bike, after I put the new shaft and butterfly in and if you tighten the nuts to the point where the my start to compress the lock washers it is better but if you...
  15. Replies
    15
    Views
    560

    super e butterfly sticking

    Hey guys, been a busy month wrenching on my 89 electra glide and 80 shovel. Currently the only thing I'm running into before wrapping everything up is that the super e I just replaced my cv with...
  16. Replies
    10
    Views
    443

    Jim, you’re a life saver! Turned it in two turns...

    Jim, you’re a life saver! Turned it in two turns past, readjusted everything and I’ve got a clutch again! Back to buttoning the primary back up and praying for the rain to let up so I can take it out...
  17. Replies
    10
    Views
    443

    @jim that’s a solid thought, I’ll give that a...

    @jim that’s a solid thought, I’ll give that a shot when I get home. Out of curiosity if the pushrod came out when I pulled the adjuster plate and screw would that be an indicator that the clip may be...
  18. Replies
    10
    Views
    443

    I had the inner and outer primary off. Put the...

    I had the inner and outer primary off. Put the clutch, primary chain and compensating sprocket back on as an assembly just as they came off.
  19. Replies
    10
    Views
    443

    92 softail clutch trouble

    Background: pulled my inner primary to fix a leak and have it 95% back together. Went to set the clutch adjustment before I put the outer primary back on but I canít get the clutch lever to be smooth...
  20. Turns out there was a evo cam in it. Pulled the...

    Turns out there was a evo cam in it. Pulled the cam and (after verifying what lifters and rockers it had) put a shovel cam in it. Static timed it and it fired up no problem.
    My conclusion is the...
  21. No offense taken, I’m just trying to learn a...

    No offense taken, I’m just trying to learn a slightly old motor and technology so I’m bound to do a few things wrong and learn from them.
  22. Alright guys we’ll ive got some good news and...

    Alright guys we’ll ive got some good news and some putting the points on hold news.
    Turns out the carb was preventing the start with the dyna on (set back to factory and we were good except idle...
  23. Well I got the light to finally go on after...

    Well I got the light to finally go on after elongating the plate about as much as the picture from johny2toes. Unfortunately it won't fire even then. Put the dyna back on and still won't fire so back...
  24. If you see one link me to it. The only one I saw...

    If you see one link me to it. The only one I saw was the one trinortchopz posted and who knows if that is oem
  25. Yeah I tried to do that in the garage yesterday...

    Yeah I tried to do that in the garage yesterday with just a drill and it was ugly and I only got through one side before running out of time but I'll bring it to work where I'm sure someone has a...
Results 1 to 25 of 38
Page 1 of 2 1 2

Log in

Log in