I build all kinds of diffrent things. Post modern house crap snowboard park features, store displays ect . Here is a few things i've done.
Snowboard park wall ride Peter line in Photo
Redbull soap box derby race burm
Lets see yours
Printable View
I build all kinds of diffrent things. Post modern house crap snowboard park features, store displays ect . Here is a few things i've done.
Snowboard park wall ride Peter line in Photo
Redbull soap box derby race burm
Lets see yours
WHOA! that ramp in the parking lot looks like a blast!
Where's my skateboard?
That's some good work ya done there. I build alot of different things but I usually don't take too many pictures. I'll start takin more pics in the future.
Thats funny i keep in mind while i was building it that it had to be skatable too work, and it was. They just used it in LA this summer
wallride looks fun. And that burm looks epic. nice work.
I spent a lot of time building guitar amps when i was 18/19... im not a fabricator, but i like to make things?
http://i162.photobucket.com/albums/t...k/P1030731.jpg
http://i162.photobucket.com/albums/t...0178rw9ef6.jpg
I am straight awed by the amps
I got to get some photos of the farm cause those that've been by, wouldn't be recognizing the interior
Damn rusjack! Why the hell did you stop? Those amps looks clean. Wiring a bike must be a breeze?
http://i719.photobucket.com/albums/w...h/P1010048.jpg I restore cars http://i719.photobucket.com/albums/w...h/P5230022.jpg I do collision work and build hot rods http://i719.photobucket.com/albums/w...h/P1010023.jpg and build models too http://i719.photobucket.com/albums/w...rc10001-vi.jpg
It got pretty annoying. Im involved in a music scene in a small town (50,000) with one main bar, and I was known as the 'amp repair guy' and friendships turned into doing a lot of work for free.
I got some government grants to start a small company and sold a few through shops in town, but it got to be too much work, and its hard to sell handmade amps to broke musicians!
I just started up a few weeks ago again, working on a tremolux clone for myself. I just needed a year away from it completley!
and wiring most things is easy at this point, diagrams are just riddles
I'm working on this Rotocaster for a friend right now. Still need to make the inner frame.
I'm thinking I could make taillights in this sucker pretty easy, two at a time.
http://i584.photobucket.com/albums/s...n/_MG_0045.jpg
http://i584.photobucket.com/albums/s...n/_MG_0043.jpg
http://i584.photobucket.com/albums/s...n/_MG_0042.jpg
Heres a few car couches I built. Both cars were saved from being crushed. At least the back end of them. They are wired to run the rear tail lights and the caddy has a smoke machine so you can hit a button and smoke comes out of the exhaust. The mustang has a clock that looks like a tach built in with cup holders, original mustang buckets and I used door panels from a mustang to make the side panels. Everything is all metal no fiberglass
http://i377.photobucket.com/albums/o...2/000_0134.jpg
http://i377.photobucket.com/albums/o...op_778x583.jpg
http://i377.photobucket.com/albums/o...agepics036.jpg
those couches are badass
couches and amps are badass!! nice work fellas! unfortunately at this time I dont have extra time to fab anything other than bikes/bike parts! SOMEDAY!!!
josh
Thanks guys. Believe me I know the feeling. It took me forever to build the caddy couch because I was busy doing paint and bodywork for everyone else.
By the way are you Josh from G&L? You put my XS up on your site. Thanks Its MIke@ Visual Impact
Yeah bro...sweet work on the couches love the caddy....
Started woodturning years ago, finally started selling some stuff. Now it pays for wood, new tools and parts to built my bike!!!
Nice
that woodwork is beautiful...