PDA

View Full Version : New to the Cult? Intros Go Here...



Pages : 1 2 3 4 5 6 7 8 9 10 11 12 [13] 14 15 16 17 18 19 20

KnoxVegas
01-31-2013, 1:34 AM
I've been lurking for little while and figured it is time that I intro myself. I'm outta Knoxville TN. I ride a hard tail with a buell motor and just picked up a 77FXE. It's too late for me to be witty or I would put some smart ass comment here.

stell82fxe
01-31-2013, 11:56 AM
I can't remember if I posted in here or not...

was on another Forum and heard about this one, so here I am.

working on an 82' FXE that I tore down a few years ago. finally getting it back up and running after a divorce and a bunch of other bull shit! liking the stuff that you guys are putting out here. looking forward to learning some shit and sharing my own experience.

usmc50lx
01-31-2013, 7:13 PM
Whats up all, I'm Paul from STL been a carnut for years choppers for about 6 years now. Have a 94 sporty going to get cut if I can stop riding! Also have a 71 CB that's raked 45* and hardtailed with a fury girder and 17" spool that's a project still. Also a Model A coupe drag car and 27 roadster project. Do all my own work from Fab to Paint in my lil 2 car hell hole(yes it PACKED). Well that's it! Keep it greasy side down!

Billdozer2
02-01-2013, 12:29 AM
Hi there. I helped start and run this site. It sold in January of 2013. I no longer have any responsibilities here, other than to try and be a decent member and enjoy the site. I'm also a co-founder at Biltwell Inc where I pretend to work, but mostly I just screw around a lot. I have a motorcycle problem and am OK with it. Cheers!

CRFyou
02-01-2013, 11:30 AM
Hi there. I helped start and run this site. It sold in January of 2013. I no longer have any responsibilities here, other than to try and be a decent member and enjoy the site. I'm also a co-founder at Biltwell Inc where I pretend to work, but mostly I just screw around a lot. I have a motorcycle problem and am OK with it. Cheers!

Welcome to Chop Cult, Billdozer2.

You have a familiar face. Has anyone ever told you that?

wolfraider
02-02-2013, 12:57 AM
Hi, I'm new to this forum. A lot of great stuff around here.
I ride a bobbed 08 Yamaha Raider, and I ride it a lot! :)

DirtyMick
02-02-2013, 4:57 AM
Just wanted to drop a line. Say Hi. I'm getting ready to start choppin my first bike. Any advice?

DirtyMick
02-02-2013, 5:00 AM
Where are you at in Washington? Looking for advice on my first chop. I'm up in Arlington. Name is Paul.

Bobbster
02-02-2013, 11:33 AM
whats up guys from Knoxville TENNESSEE!!! Just got a 95 XL1200 with a few bobber upgrades but plan on making it my own this year. Road track days before on a CBR and thought it was time for the real thing...Harley. Cant wait to sell all my racing gear and start cutting this bike into something sweet.

JusCuzCustoms
02-03-2013, 6:58 PM
Wassup everyone. Names Mike and I am from Sumter, SC. I have a little shop called JusCuzCustoms. I try my best to do all of my own work as much as I can. I am a pretty down to earth guy and don't mind unexpected company. Feel free to message or text me any time (803-236-0120). Right now I'm in the middle of building an 81 Honda CM400a. I am also fixing to start on two other projects. Glad to be here and hope to make some friends.

blakeb
02-04-2013, 4:00 PM
Hey guys new here from ft worth tx heres my 79 xs650 <a href=http://s24.photobucket.com/albums/c48/theflavorkylee/?action=view&current=20130202_165724_zps4b5c76c6.jpg target=_blank><img src=http://i24.photobucket.com/albums/c48/theflavorkylee/20130202_165724_zps4b5c76c6.jpg border=0 alt=></a>

mitchelltannahill
02-04-2013, 8:39 PM
hello from chicago.

Helwade
02-04-2013, 9:39 PM
Same dude, different agenda. Most of my time on the new and improved ChopCult will be confined to lurking in the American and Brit bike forums, but I'll probably vent my spleen or write a bike feature from time to time.

Thanks to everyone who continues to contribute time and knowledge to the chopper SocNet that is still VERY near and dear to my heart.

Harold "McGoo" McGruther

FleabagBob
02-05-2013, 6:58 AM
Just found out about this place nice forum.
I own a 75 xlch been riding it a while now its in rebuild mode so pics to be coming soon.
Ride in South Florida always looking for some new road brothers.

CRFyou
02-05-2013, 10:28 AM
Same dude, different agenda. Most of my time on the new and improved ChopCult will be confined to lurking in the American and Brit bike forums, but I'll probably vent my spleen or write a bike feature from time to time.

Thanks to everyone who continues to contribute time and knowledge to the chopper SocNet that is still VERY near and dear to my heart.

Harold "McGoo" McGruther

It looks like your Avatar has you as a "grower" and not a "show-er". That's just like me!!

spent
02-06-2013, 2:32 AM
Been lurking around for ages and finally decided to sign up. Recognise plenty of names from other forums I'm on. Look forward to having yet another place to kill time at work. My digger, the Pan, the Cone, and both Triumphs are long gone [sadly many left without being finished] and the Ironhead my buddy and I built is gone as soon as I find someone who wants it, but I've got a couple of XS's to keep me busy until I gather enough parts to start calling the pile in the corner a BT project.

blakeb- That's a nice looking scooter. What's that front drum off of?

SCARE
02-07-2013, 12:03 AM
Hello from New Zealand. I've got a couple XS650's, and a shitload of old little Hondas..

Lucky77
02-07-2013, 3:41 PM
Hello from Minnesota. I have a Heritage Softail and a XS650 bobber. I'll throw some pics up later. Had I known about XS650's before, I probably wouldn't have ever bought my Hog!

ultrajosh
02-07-2013, 4:41 PM
Hey everyone, My name is Josh from Orange County. Thought I would stop with a little introduction. This is my scoot right now. 06 Sportster 1200 Low. Just bobbed the fender and threw on a model A taillight. Got a bunch more mods to make. Thanks for all the help

Davyg
02-09-2013, 2:48 PM
What's up all names Dave from st.louis mo looking forward to being apart of this forum. I ride an old beat up 95 hardtail spec. Construction. With a 103in stroker and a 5 speed. It'll be cool to make some new friends on here

Later Dave

Pete666
02-10-2013, 4:23 AM
Morning all. Pete here from over the pond. Bought myself a Nightster last February, for most of my riding over the years I have always had sports bikes/streetfighters but since bagging the HD I wouldn't go back.

Usual mods, short shots, heavy breather, fuel pack, Biltwell zed/tracker bars, Joker speedo relocation, Joker headlight bracket, Progressive 11's, RSD Brace etc etc.

porkchop5000
02-10-2013, 6:00 AM
just a quik line to say " 'sup". thanks for accepting me into the "cult"!

how do i post picts? photobucket?

wheres the "before and after" thread, i got a few to show?

Allen
02-10-2013, 6:23 AM
just a quik line to say " 'sup". thanks for accepting me into the "cult"!
how do i post picts? photobucket?
wheres the "before and after" thread, i got a few to show?

We were just talking about this question...
HOW TO POST PHOTOS (http://www.chopcult.com/forum/showthread.php?t=2806)

or copy your URL and hit that little yellow photo icon up top...

and welcome to the 33

~Allen

Slicebo
02-10-2013, 5:38 PM
Long time lurker finally joined... super cool stuff you folks have going on here... I'm in L.A. and Ventura... see ya around! Bo:D

tattooedfamous
02-11-2013, 10:56 AM
Hello my name is Isaac I'm from Thief River Falls MN. The only bike I have right now is a hard tail 1960 Triumph that is a work in progress. Thanks for the time, your help and info.

gypdawg
02-11-2013, 8:32 PM
Whatsup, I' m gypdawg, checkin things out here and this is great site. I heard of it on another site (XLF), but this is more my style.. Chop on bros,so many cool bikes on here!!! l8tr

littlelee
02-12-2013, 11:41 AM
Doing this Bass Ackwards, Been on or around bikes most of my life currently riding a 04 Low Rider and getting ready to bob out a 67 Triumph Bonnievile. I got back in 80. Road it hard and put it up wet back in 84 when I got married.

jaxbch883
02-12-2013, 3:12 PM
im new and stoned

Pyrokustoms
02-12-2013, 7:05 PM
Hello all. Time to do an intro. Pyrotec Kustom Cycles.. We have a small custom shop outside of the St. Louis mo area in Alton ILL. Shop was founded in Jan 2000 and we have been doing fab work, bike builds and paint work ever since. Have had some features in Hot Bike, Iron Works, American Cycle, V-twin, Biker net and several local mags. We had a website up for several years but it was to hard to update so we recently decided to start a shop blog . pyrokustomcycles.blogspot.com Blog is called Pyro Chop. Thank's

MrRiley2U
02-13-2013, 12:41 AM
35894What up, Cult! I'm Ian and I live in Chicago. I've been riding bikes all my life, pretty much, starting with a mini bike for my 8th Bday. Rode a rocket for a few years. Had to have a '00 GSXR 750 once I turned 18. Got myself an '04 Night Train for my 25th Bday, 5 years ago, and can't get enough. No real mods to it yet, just love the hell out of riding it! Want new pipes and bars one of these days. New dad so riding a little less, but we get out. In any case... Ride Hard or Stay Home.

KruMC

Xshovel
02-13-2013, 5:27 PM
My name is James. I live in Derby NY. Thats just south of Buffalo. Did some time in the USMC and Army over in Iraq/ Afghanistan. I had a 76FLH for a couple years but the wife sold it while I was being med retired out of service. Have an Evo rigid now and will post some pics when I figure it out.
I grew up in WNY but havent been here in 14 years. But I am back for now and am kind of pissed about the chop scene. It seems if you dont have a store bought harley and ride it 100 miles a season your not a biker. Whatever working on mine now and will show some pics even though its an evo engine.

Wood
02-14-2013, 2:13 PM
Been lurkin a while figured I'd post something so here's the obligatory intro

LongHair
02-14-2013, 3:51 PM
Guess I had too. Been lurking

LongHair

Kye
02-15-2013, 6:27 AM
Hi I'm Kye

Dragon5
02-15-2013, 3:53 PM
Hey everyone, been lurking a while, finally decided to make an intro. Already learned a lot from this site. Right now Im a mechanic in training which means I can do a pretty goo job of tearing apart my wife's sporty and spend a long time and a lot of beer trying to figure out how to put it back together. CC has been very helpful in my adventures so thanks in advance because I will be doing a lot more learning than advice giving. Beers on me.

XR1200Tom
02-16-2013, 9:46 AM
New here, stumbled onto the place while tracking down info on the Burly Sportster Scrambler build.....which is pretty freakin' great. Among my bikes I have two Sportys, my '09 XR1200 (40,000 miles on it...my daily rider :)) and my '06 883R.

My current plan is to convert my 883R from it's current Cafe style to the Burly Scrambler style...Should be fun!

Anyway, this looks like a great site. I look forward to learning from y'all. I mainly hang out at www.xr1200ownersgroup.com .......

http://i1086.photobucket.com/albums/j451/TomXR1200/Copy_040.jpg


http://i1086.photobucket.com/albums/j451/TomXR1200/9074B676-7685-46E5-A4E8-E5FE531DC4F2-263-000000E182723528.jpg

meatfarts
02-17-2013, 10:21 AM
I'm Ben. Love this place, finally joined.
Currently in Brooklyn NY but seriously considering moving back to Florida where I can afford a garage and can ride year round. This winter stuff blows.
I'm destroying a new 48 and I have no intention of ever stepping foot in a dealership. So if you guys are familiar with NY and know of a good Harley mechanic in case I get in over my head please share.

And now I will attempt to post a pic. Drum roll please......

meatfarts
02-17-2013, 10:24 AM
Oops yup OK flicker account, I get it. ΔΔΔ

Skoots
02-17-2013, 2:57 PM
Intro here, Eric stationed at bragg. I was brought here from my new addiction to 60s style choppers.

tochka
02-17-2013, 5:45 PM
Hi i'm tochka, new here. Love bobbers and pinstriping
Edit: i'm from europe

sambo42xa
02-18-2013, 12:29 PM
New here from New Hampshire USA. No Custom builds here but working on reserrecting my 1942 Harley XA when $ and time allow. My son is possibly picking up a 71 Sportster rigid bobber this afternoon and hopfully I can post some photo's of both machines soon!
25 degree's, sunny and windy
sambo

baltimonster
02-18-2013, 2:15 PM
Dan here. Bobbing a sporty in my living room in Baltimore. Hacksaw in hand and new parts with each paycheck. Hoping to "finish" before it's warms up a little bit!

bmxatv
02-18-2013, 4:39 PM
^^^awesome.



Sent from my iPhone5 using Tapatalk.

JuiceJames
02-18-2013, 7:30 PM
New from Central IL. Been lurking this site for awhile getting ideas and finally set up an account.

TheDrill
02-18-2013, 8:50 PM
Dave from Columbus here.

I'm a weird dude.

TuckerSpeed
02-19-2013, 12:55 AM
Garrett, from Georgia build Triumphs and starting to work my way into Harley's. Stoked on this site for sure.

DarrellG
02-20-2013, 9:08 AM
Darrell from NE Tennessee. Finally shed enough bullshit from my life to afford another bike. The downside is that I'm over 50 which was a part of my decision that if I didn't get one now I never was. I'm pretty pumped about working on a bike again. Seems like you have a very cool community here and I hope I'll fit in.

Hahn
02-20-2013, 12:49 PM
Hey fellas, a buddy of mine recommended i check out this site. Browsed around and saw some good stuff so figured i sign up. Im new to riding, just bought my first bike a couple weeks ago, a new 2013 Harley 48. Ive already got an idea for what i want to do with it, just a matter of time before i start experimenting with her.

http://i786.photobucket.com/albums/yy149/firefighter_hahn/Harley48_zps1f094cb3.jpg

herndon18
02-22-2013, 12:08 PM
Hey guys im new to this forum, name is Cody. Im 19 and have a passion for old motorcycles. Ive owned a few but got my first bike to chop this year. A 1980 xs650. I look foward to building it up from scratch. Also just scored two cb350s for $100 so plan on building one of them. I look foward to being a part of this forum and learning more. Thanks :cheersmate:

Motorradfahrer
02-22-2013, 1:00 PM
Welcome to Chop Cult, Cody.

I look forward to seeing your build thread(s) in the Japanese section of the forum. Post some pictures of your bikes as your work progresses.

Please post introductions here (http://www.chopcult.com/forum/showthread.php?t=96).

StinkyArmpits
02-22-2013, 5:39 PM
New here from PA. No build yet, but gathering ideas.

LeadFootFresh
02-23-2013, 3:28 AM
36406 wuzz up Chop Cult people.. Lurked on these pages for few yrs but jst joined.... First off i'd like to say i dig all things kustom,, carz .bikes,gunz.. whatever.. I dont claim to be no bike builder i jst enjoy wrench'n on shit.. my back ground is for the last ten yrs i worked for Quick Fuel technology's... carb guy.. Ive tune of some race carz an such for yrs.. Ive had bad ass cars since my first but now dig the shit outa bikes.. I grew up around Harley's and Triumphs since i wuz way young... and hadn't had one myself untill couple yrs ago,, I'll post sum pics at my first little sporty i chopped up that now belongs to my soon to be father in law...It was all stock ''girls'' bike as they say when i got it... But i jst picked up a lit 92 sporty on the cheap thats next.. so we will see what happens .... chop on.. DC

Badsport
02-23-2013, 12:10 PM
Hey all,

New guy from AZ here.. Working on a after-market FXR frame and a 66 Iron head Sportster that I am picking up in a few days. Will start a build thread once I make some progress :kill:


http://img.photobucket.com/albums/v327/badsport400/FXR/SANY0706_zpsf4032bcd.jpg

Amouxdiesel
02-23-2013, 2:49 PM
The name is Mike Diesel
Third coast native who enjoys riding
in one of the most bipolar climates of the south.
Currently sitting on a 02 xvs650 project that's getting no where fast. :banghead: lol
Love the site!

xlh1958
02-23-2013, 3:47 PM
New guy from toronto
I've restored 58 sporty, brought back to life an 84 sporty, just starting on a 76 Bo Neville, and recently picked a vintage Vespa. Looks like agreat site! Oh yeah I also want something new as a daily driver.

buia76
02-25-2013, 4:57 AM
Hi guys first of all scuse me for my fucking bad english !!!!!
Hope to be a new friend of yours
I live in Sardinia Italy and I ride a HD Sofail 1340 but in my heart I miss my old Shovelhead
I saw you revenge run on you tube fucking cool people and cool situation ope to meet you one day !!!!
keep in touch
Max

buia76
02-25-2013, 5:11 AM
36468

Skirouled
02-25-2013, 5:06 PM
Jeff from Duluth MN here. I'm 19 and bought a 2012 Iron 883 Sporty last year brand new. Before that I owned a 76 KZ400 Kawi, but I could never get the carbs/ air leak figured out, so I sold it to a buddy of mine and made a down payment on the Iron. I've got future plans of building a Caf'e/ flat tracker out of a '74 Yamaha 175 Enduro. K, enough about me.

JackCrank
02-27-2013, 11:35 AM
Hey CC. This is Jack from Brooklyn. Been lurking for a while but figured it was worth it to join. Have a bunch of friends on here and spend a lot of time in the for sale section wishing I made more money. Along with a bunch of friends, I've helped organize the NYC vintage motorcycle show for the last 3 Augusts and am working on a seminar series in nyc with my friend Corinna (Miss1932). Hopefully see some of y'all around.

Anyways, not a "chopper" per se but definitely chopped to hell. Currently turning this 1980 Yamaha XT500 enduro
http://farm7.staticflickr.com/6065/6103853036_7d29b03936_z.jpg

into this frankenthing
http://farm9.staticflickr.com/8508/8507440014_1296642d5c_c.jpg

JackCrank
02-27-2013, 11:38 AM
And one of these days I'll own my own version of this

http://2.bp.blogspot.com/-55C8saqHY_c/Tx7tms804aI/AAAAAAAACGk/Qf36SWBYqbE/s1600/Biker+dale+velzy+knucklehead.jpg

FuckNutzMcFly
02-28-2013, 7:47 AM
You stupid fuckers!

Been lurking here for a long time. I used to hack Matt O's account and fuck with people on here all the time. From Boston. Ride everything I can get my hands on (including your mom!) I know what a fucking bobber is. Excited about the tour of 1812 this spring. Should be riding my 76 fxe if it lets me.

jbfrmca
02-28-2013, 12:19 PM
looong time lurker.names john. i'm from cali. go by the name jbfrmca on the boards. hope i can post intersesting knowledgeable comments from time to time but if not i'll just post the dumb shit as usual.

Chux
03-01-2013, 3:12 PM
New to this board, been on others and dig this one alot...hope to share some good stuff with other like-minded cats who dig 2 wheeled freedom machines as much as I do...

mortauxflics
03-03-2013, 12:28 PM
yo baby, sup.

i'm a bicycle mechanic and racer who got into scoots when i had an injury that kept me from pedaling a few years ago. i'm from allentown, pa... i see mostly sport bike bros around here, so looking for people to link up and wrench/ride with. i'm into getting weird and exploring old shit. fuck cops.

peace.

rsuzi
03-03-2013, 5:00 PM
Fack it's cold up here! Just waiting for the snow to melt up here in Saskatchewan so I can fire up my 81 suzuki gs, 400, building a crazy ass custom suspension, has some hand tooled side tins to cover the electronics and a nice airbox cover on the other side. I'll add a bunch of pics where and when i can.

tubtub
03-04-2013, 9:17 PM
New to this board. Big time lurker from Saint Louis missouri with a bastard 1972 tr6 i'm trying to sort out. I hope to tap into some knowledge here.

Domantori
03-05-2013, 10:01 PM
FNG from st.louis here. Had a sporty 48 and 3 xs650's until some d-bag stole/destroyed the 48. Sold the other shit soon after. Been lurking on here for a few years. Back in the market for a new chop. I enjoy warm socks straight from the dryer, head butting my dog into submission and relentlessly staring at my 3 kids.

Carolina
03-06-2013, 9:26 AM
I've been lurking on here for a while, searching for answers to questions and such. Born and raised in NC. Lived in Seattle for a few years, and just moved back to NC a few weeks ago. Had to sell all my bikes before the move.
I'm picking up my first American bike this weekend. Can't wait to make it my own. Plan to pick up another project shortly after.
Anyway. I'm here.

EagleScout
03-07-2013, 6:07 PM
Been lurking here for a while I think it's a cool forum. Just moved to Vegas looking for some people to ride with or just hang around and shoot the shit. Right now I'm working on a Vulcan 800.

oldguyjohn
03-07-2013, 8:30 PM
been lurking for a while, and finally pulled the trigger. its a welcome breath of fresh air. ride a 77fl bobbed.

yosoyjoseperez
03-10-2013, 6:02 AM
Hi
I'm the new guy here. From Barcelona, Spain. Riding my modified vstar 650, here you can see some pics of her
http://freekustomcycles.blogspot.com.es/2013/02/draggys-project.html
Hope I can share and find experience and wisdom with you guys.

thevoodoochild
03-10-2013, 2:42 PM
hey there, been lurking around for a while now and i finally signed up...im Maxi, born in argentina, been living in Miami for 11 years now!! i was introduced to motorcycle not too long ago and it was love at first sight... i ride a honda chop, a hardtailed shadow 600......and i decided to start a new project...a big twin.... even though i have no experience in mechanics of any kind, im a fast learner and very handy so ill give it a try..... i find a lot of inspiration and motivation from this site!! cheers!!

RedemptionCycling79
03-11-2013, 7:43 AM
What's up all. Dave here. I live in the Florida panhandle, Lynn Haven with my wife and dog.
I just joined the site. Love the fact that all makes and models are appreciated here.
Owner/operator of Redemption Cycling in P.C. We build custom, steel frame race bicycles, and hand made motorcycle parts(tail lights, seats, bars, pegs, etc). I also do custom paint and pinstriping.

Ride a bobbed Honda VLX every single day. Don't even own a car. I use my old lady's 4Runner for haulin' materials to the shop.

If anyone is coming for the Thunder Beach rally, spring or fall, hollar' at me and we'll cruise around. I'll show you the cool spots in town.

Chop 'em.

beedle
03-11-2013, 7:49 PM
Hi.

I've been lurking for a few weeks and figured I should finally sign up. I found this site from the Biltwell Triumph build thread, it's given me lots of neat ideas for my Hinckley Triumph. I'm relatively new to the whole custom motorcycle scene, and this looks like a fun place to learn.

*resumes lurking*

JHoggSDCA
03-13-2013, 9:02 AM
Whats up CC,
Been on here a few months now, but after signing up and doing a few days of lurking, I dove right into to the other forums skipping the intro shit, so what's up? I'm Justin from San Diego by way of Va Beach.
Left another forum after getting tired of hearing bitches whine about stupid shit or what windshield should they go with. After about a year on that I never really recieved too much good advice and never went on one ride with anyone from it. Since joining CC, I've met plenty of like minded fuckers, got plenty of good advice, tips, and inspiration, heard a few good stories, and had a couple good laughs. Keep up the good work assholes

gmd
03-13-2013, 10:23 AM
Hello ALL, i have been around bikes my hole life, family of biker, now i am finaly going to get mine ( been in the army 10 years never really had the drive ), dont relly know what to say, im in to bobbers more then choppers so im in to sportsters ,dynas , and crossbones, but i will probly end up getting a street glide or road king later on once i am finished with my bar hopper i plan on makeing,

captmandel
03-15-2013, 6:50 AM
Hey all, I am new to the site! I live in South Florida and am really excited to get a bike. I just sold my 2008 cbr600rr and I really want to get something older. I dont know why but suddenly i want an old bobber or a street tracker. I dont know much about motorcycle mechanics so hopefully I will have you all as a great resource. I really want to get a Yamaha SR500 so if anyone knows of one for a good price I am there! You will probably laugh but I really want a kick start. Even though I have never kick started a bike I just know i want it. I dont know maybe im just nostalgic for a period i never lived through! anyways nice to meet you all, My name is Josh. :killerjob:

RickJamez
03-15-2013, 4:37 PM
my names jimi, lurked for a bit liked the site so i decided to join. ive been riding my whole life, on the streets since 07 been wrenching just about as long mostly on jap bikes but i got my first american bike recently so ive been workin on that lately. pretty stoked about some of the up coming event, hopefully i can meet some people that live local and start doin something besides solo riding. hope to see some of you around
Jimi

<a href="http://s1339.beta.photobucket.com/user/Jimi_Garcia/media/d430984b-bd1b-499b-b050-ec41a01ae8a7_zpsb0c9cd77.jpg.html" target="_blank"><img src="http://i1339.photobucket.com/albums/o702/Jimi_Garcia/d430984b-bd1b-499b-b050-ec41a01ae8a7_zpsb0c9cd77.jpg" border="0" alt=" photo d430984b-bd1b-499b-b050-ec41a01ae8a7_zpsb0c9cd77.jpg"/></a><a href="http://s1339.beta.photobucket.com/user/Jimi_Garcia/media/6c5a262e-da4d-450d-b5cd-7468205f8899_zpsdf8d7c5a.jpg.html" target="_blank"><img src="http://i1339.photobucket.com/albums/o702/Jimi_Garcia/6c5a262e-da4d-450d-b5cd-7468205f8899_zpsdf8d7c5a.jpg" border="0" alt=" photo 6c5a262e-da4d-450d-b5cd-7468205f8899_zpsdf8d7c5a.jpg"/></a>

radgto
03-17-2013, 8:53 AM
Hi all... Duane from Michigan here.

I bought my CB 550 bobber project off a guy at work who had a choice to either keep the bike or his very beautiful girlfriend. Not sure I would have made the same choice though.

Frame was already done as were the wheels and bars. The rest is my own.

Here it sits last weekend, I had just primed the mustang tank, fender and cover plate that holds the seat. Seat is out getting covered with leather.

I have about $1600 total into it now including a new dyna ignition and coils.

http://img.photobucket.com/albums/v96/radgto/IMAG0197_zpsba392f99.jpg

5w1tchman
03-17-2013, 11:35 AM
Hello peoples!

Panelrodder
03-18-2013, 9:36 AM
Finally registered but been a lurker for awhile.

05 Sporty.
http://i281.photobucket.com/albums/kk224/panelrodder/2005%20Harley%20883xl/IMG_20120703_162121.jpg

Been just riding the crap outta it since I finished the bulk of the work. Its not perfect but I did everything on it including run the spray gun and pull the stripe brush.

-Panelrodder

VanD
03-19-2013, 3:09 PM
http://sphotos-a.xx.fbcdn.net/hphotos-ash3/599129_10200933253280682_572446719_n.jpg

Just got my first bike and of course its a bob. Custom frame, gs1000 engine, triumph tank

pinheadstriper
03-19-2013, 6:24 PM
Been lurking for a while finally signed up. I grew up around bikes my whole life and have been a professional tech for 13 years. The only thing I love more than building wrenching and riding is pinstriping just about anything that will hold still.

fortycal
03-20-2013, 7:09 AM
Hey fellas,

I'm new to this here site. Messing around on the ole internet machine the other day and came across it and thought it looked pretty alright so I signed up. Just wanted to introduce myself. My name is Matt a.k.a. .40 cal. and I like in Alcoa, Tennessee. Any kats in that area? Gimme a shout. Look forward to checking out the site!

Allen
03-20-2013, 7:16 AM
I don't get around this thread to welcome enough of you to the Chop Cult, but the steady stream of new members (and the quick pics they're posting) makes me wanna say "Welcome!"

motorick
03-21-2013, 7:51 PM
Hello. My name is Rick, and I'm addicted to motorcycles. And I'm off the wagon.

mrkeller
03-22-2013, 8:44 AM
Been cruising the forum for awhile now and finally got registered. Bought my first bike just this week. And can't wait to start bobbin it out. I have a 81 Suzuki GS650L.

IrnMdn69
03-24-2013, 8:34 AM
Hey, my names Todd from Saskatchewan. Lookin forward to participating on the board. Thanks.

garym
03-24-2013, 1:21 PM
Hello everyone

My name is Gary; I live in Brecon (South Wales) United Kingdom. It is hard core weather for riding year round here, mostly wet but currently -2 and snowing.

I ride a HD Sporty and have been riding since I was 16, Jap stuff at first then Harleys since 1991.

Great forum.

Regards

Gary m

Sidestreethavoc757
03-24-2013, 6:20 PM
Justin from VA. Ride a dyna. Building an 05 sporty. Eventually.

jb77
03-26-2013, 10:12 AM
Just a newbie sayin hey...

UtahBootyTodd
03-29-2013, 6:23 AM
Sup fellas..Thought I'd come over and check out whats goin on.

gsryder
03-29-2013, 9:24 AM
Been checkin this place out for a bit figured I would sign up.

Looks like fun

tcainer
03-31-2013, 3:43 PM
Hey guys, finally picked up my first bike(yeah, I know) the other day. A 2004 Sportster that started as an 883, but has since grown to a 1200. I don't know how to ride yet, but the deal was too good to pass up. I'll be cleaning it up and changing a few things until I take the riders course in a few weeks.

http://i.imgur.com/YWX2sTKl.jpg

bmxatv
03-31-2013, 4:16 PM
Awesome dude. Good luck. You'll be ripping around in no time.



Sent from my iPhone5 using Tapatalk.

ARBY
03-31-2013, 4:35 PM
Hey y'all. Welcome from me in sunny FLA.

wnrn
04-02-2013, 9:37 PM
Hi all.

Real name is Ross. wnrn user name comes from my blog is called

http://rossmz.blogspot.com.au/

New here. Have been lurking and reading for sometime now.

A few days back I bought a 1972 CL450 Honda off a mate. It will need lots of love. It will be brat/bobbed.

I also ride a naked 1200 bandit that was once a faired bandit.

Have been riding since 1979.

rudyod
04-03-2013, 1:15 PM
Hey y'all. Rudy from Oklahoma here. Got a '72 shovel dresser and recently acquired a '50 FL chop that i'm currently "personalizing." Pretty much every google search led me here so thought i'd sign up and tap into this incredible wealth of knowledge.

http://i1288.photobucket.com/albums/b482/lefleck/009-1_zps3b72ed96.jpg

blackout
04-03-2013, 1:43 PM
Hey y'all. Rudy from Oklahoma here. Got a '72 shovel dresser and recently acquired a '50 FL chop that i'm currently "personalizing." Pretty much every google search led me here so thought i'd sign up and tap into this incredible wealth of knowledge.

http://i1288.photobucket.com/albums/b482/lefleck/009-1_zps3b72ed96.jpg

Hope to see ya at just kickers later this month.

heartburn
04-03-2013, 7:59 PM
Hello everyone.
New member here, I have been a lurker for quite a while, picked up some tips and have learned some things viewing the content of the forums. I hope to be able to contribute with knowledge or tech in the future

ZMonic83
04-05-2013, 6:03 PM
Hey everyone......whut up? Im new here so just seein whats all goin on.Site looks pretty kewl.Dont be hatin if i ask a dumb question or two. Doin my first build so something is bound to pop up here or there.Later......

Dennis53
04-06-2013, 5:20 AM
Hey everyone. Got here through just kickers. Got a rigid with a 96 inch shovel with a ratchet top 4 speed for a fun bike and a 1974 FLH.


http://i106.photobucket.com/albums/m272/cjweaver73/Rigid%20build/1a005.jpg


http://i106.photobucket.com/albums/m272/cjweaver73/FLH-Copy_zps43df9628.jpg

http://i106.photobucket.com/albums/m272/cjweaver73/shovel%20pic%20new/a062.jpg

snowblind
04-06-2013, 10:57 AM
'Matt in Milwaukee. Crashed my Buell used the motor/forks in this.

<a href="http://s84.photobucket.com/user/fesitvus/media/DSC04842.jpg.html" target="_blank"><img src="http://i84.photobucket.com/albums/k2/fesitvus/DSC04842.jpg" border="0" alt=" photo DSC04842.jpg"/></a>

Been working on this for over a year almost ready to ride

<a href="http://s84.photobucket.com/user/fesitvus/media/009-3.jpg.html" target="_blank"><img src="http://i84.photobucket.com/albums/k2/fesitvus/009-3.jpg" border="0" alt=" photo 009-3.jpg"/></a>

MFCcycles
04-08-2013, 7:44 PM
Hey, I'm Colin from Calgary Alberta. Been lurking for awhile. Up for a cruise any time for folks in the area. Pictures of my bike are on my profile for anyone who gives a shit about seeing a beat up softail.

the1337aaron
04-09-2013, 4:35 PM
hi all, new to the cc forum, im in houston texas and my scoot is a 73 xlh that i did a lil custom work on. Enjoy and i hope to meet and ride with some of yall one day
http://i3.photobucket.com/albums/y60/the1337aaron/IMG_20121015_161629.jpg
http://i3.photobucket.com/albums/y60/the1337aaron/IMG_20121015_161649.jpg
http://i3.photobucket.com/albums/y60/the1337aaron/IMG_20121015_161701.jpg

timxxx
04-11-2013, 2:55 PM
Been riding for a bit now, picking this 96 Sportster up as soon as I sell my 77 CB750. Will definitely be looking for some how-tos on the Sportster soon. Also always looking for people to ride with!

http://i1340.photobucket.com/albums/o729/timdove/IMG_1123_zps59607ffd.jpg (http://s1340.photobucket.com/user/timdove/media/IMG_1123_zps59607ffd.jpg.html)

http://i1340.photobucket.com/albums/o729/timdove/IMG_1125_zpsa3191edc.jpg (http://s1340.photobucket.com/user/timdove/media/IMG_1125_zpsa3191edc.jpg.html)

Aux
04-11-2013, 7:58 PM
First time poster long time lurker. Rolling in Burlington Ontario. After owning a succession of progressively more quality vintage bikes from the most busted '83 XS chopper to a decent '78 CB750, I got out of the vintage game when a little human entered my life and swallowed the majority of my wrenching time in one fell swoop. Moved from vintage to a rubber mount sporty and now on to a 2000 Dyna Conv upon which I have mounted some fancy biltwell and local made hardware and have managed to restrain myself from building a thug style whatever. Hello world.

warthog
04-12-2013, 3:39 PM
Just want to say hello

joker253
04-13-2013, 2:56 PM
Hello everyone,
My names Brian thought I introduce myself here. I'm from Maine and currently the weather we have here isn't the greatest for riding yet so I hope it turns better soon. Ok happy I found this site as I'm sure I will find some much needed advice on my current project.

I managed to get my hands on a 1967 BSA chopper. This will be my first adventure with British motorcycles so I'm sure it will be interesting. I'm not new to riding as I over 45 years tinkering and riding. When I get a chance I will post the pics of this project in the British section here to share with everyone. Please feel free to pick apart my work at anytime, I do believe you can teach an old dog new tricks and I'm always looking for good advise.

Exit39
04-13-2013, 8:58 PM
Not so new to bikes, but new here! Name is Scott; I go by Aced It on multiple other forums. I have an '03 Honda Shadow ACE VT750 that's not so chopped, more sledded. Bought it bone stock with some bolt-ons from a couple that was moving and had no where to store two bikes they had. I tore it down and made what you see below.

I do all my own work, from the body paint to the leather bags, floor boards, forward extension, painted white walls, etc ... with exception to the seat which I snagged from a shop that does work for Harley's. The pan was designed for a Sportster, but I fabbed a simple bracket and ta-da. I currently have a keyless ignition that I installed which was sponsored by Digital Guard Dawg. The video has not made it to their site yet, but that was the swap for the free system, haha! Cool product too.

From the beginning this was a budget build for me and I spent less than $800 to date, excluding new tires. I have a build thread from other forums and hope to get to posting it here. I am venturing on to another project bike, yet unknown as I have to find the right one. I'll be chopping the next one and really look forward to getting ideas from this awesome forum!!

Before:
http://i736.photobucket.com/albums/xx9/exit39/Motorcycle/30fb25e5-orig.jpg (http://s736.photobucket.com/user/exit39/media/Motorcycle/30fb25e5-orig.jpg.html)

After:
http://i736.photobucket.com/albums/xx9/exit39/Motorcycle/f2178d39-ebc2-4111-867a-2a4adb55eec2.jpg (http://s736.photobucket.com/user/exit39/media/Motorcycle/f2178d39-ebc2-4111-867a-2a4adb55eec2.jpg.html)

Here's a walk-around video (minus the bags and HID headlight bulb) ... click for the jump:
http://i736.photobucket.com/albums/xx9/exit39/Motorcycle/th_Aced-It-12-13-12.jpg (http://i736.photobucket.com/albums/xx9/exit39/Motorcycle/Aced-It-12-13-12.mp4)

Glad to be here, hope to learn and gain inspiration for future builds. Hope you can except a sled around here in bobberville. :D

LOUDandLOW13
04-14-2013, 1:12 AM
what's up everybody? the name's josh and I live in west tennessee. my grandpa raced dirt track and supercross back in the 60-70s so I basically grew up around/been riding since not long after I learned to walk lol I enjoy fabricating/restoring anything...bikes, power wheels, anything with wheels. starting school for welding certification this fall, psyched. my current project is a 1978 Honda CB125. plan on making it a bare bones bike with custom seat/tank/ignition system and another few mods. I'm currently awaiting a few mechanical/electrical components so I'll keep you guys posted and take some pics within the next few days :cool:

LOUDandLOW13
04-14-2013, 1:17 AM
[QUOTE=Exit39;484524]I do all my own work, from the body paint to the leather bags, floor boards, forward extension, painted white walls, etc ... with exception to the seat which I snagged from a shop that does work for Harley's. The pan was designed for a Sportster, but I fabbed a simple bracket and ta-da.



After:
http://i736.photobucket.com/albums/xx9/exit39/Motorcycle/f2178d39-ebc2-4111-867a-2a4adb55eec2.jpg (http://s736.photobucket.com/user/exit39/media/Motorcycle/f2178d39-ebc2-4111-867a-2a4adb55eec2.jpg.html)]

LOOKS SICK DUDE :cheersmate:

Hookhands84
04-14-2013, 12:21 PM
Hey guys, long time lurker, just joined up! :cheersmate:

Jetblack
04-14-2013, 12:51 PM
Welcome aboard everyone; looking forward to see what you all bring to the cult.

:cheersmate:

Hogie43
04-14-2013, 7:32 PM
Long time lurker but finally decided to actually register. From New Mexico. mechanic at a small shop, Valencia County Choppers. We've been around for 30 years and work on everything American but specialize in everything pre-Evo. Looking forward to exchanging info with everyone. Killer site!

tucknasty06
04-16-2013, 9:13 PM
Finally decided to join! Here's my bike bobber5

IronAndy
04-17-2013, 4:03 AM
hello everyone from kcmo. got a 76 ironhead chop. always got fabrication question . tried the xl ironhead forum but to many rude answers just couldn't take it. hope this forum is different .

Gnarly
04-17-2013, 5:26 AM
Were the rudest they come!:cheersmate:

Deckard43
04-17-2013, 5:47 AM
Were the rudest they come!:cheersmate:

"We're" mother fucker, get it right!
Just an example of our rudeness.

Fyi you got to have thick skin around here. Just don't be a douchebag and you should be alright. We're all here to learn new shit from one another through trials and tribulations of chopperdom.
Welcome aboard IronAndy. To save you some trouble, be sure to read the forum rules.

Evidence
04-17-2013, 6:33 AM
Welcome to CC, im just south of you down in yuppie-ville JoCo and work downtown. Shoot me a pm, we should go putt around sometime.

Brokenpress
04-17-2013, 8:42 AM
New guy in Chicago. 3 builds going-
'68 bsa bobber. '76 xs500 -hoping to complete before mods vs rockers. '81 xs400.

Already have gotten some good info off here. Glad to be a part of the mix.

IronAndy
04-17-2013, 4:59 PM
how for I post and where disregard.

IronAndy
04-17-2013, 5:06 PM
in the middle of bike chop and case has been at wades two wheelers forever not a good place for motor work if you ever want to ride your bike. its in lee's summit my bike will be up and running in 45 days though you bet we'll ride.

IronAndy
04-17-2013, 5:18 PM
excuse me I mean douchbag answers

Bakmatj
04-20-2013, 10:11 AM
Hey everyone, The names Matt. I ride an 03' wide glide as of right now and just ordered material for my first rigid build i'll be taking a stab at next month. We just had a fresh Layer of snow piled on us up here in MN, so i've been frequenting this amazing site just to get through the day. CC is full of amazing work, that I have MUCH respect for. Thanks and I hope you'll have me.

-Matt
:cheersmate:

TenSpeed
04-21-2013, 7:33 PM
Hey guys. Obviously new to the site, but not too new to bikes. I used to ride sportbikes, but just my '06 ZX14 to pay down some debt. My dad was nice enough to give me an '81 CB900 that hasn't ran in a few years. I'm going to get it running, taking shit off it, and see what I end up with. I only know enough to get myself in trouble and ask stupid questions. I'll be sure to search before asking. I'm posting from my phone, but will try and upload what I'm starting with. I realize the picture might be too big, but it's the best I can do for now.

http://i.minus.com/jbjLrDroYdy1SD.jpg (http://min.us/m6upXYYHlRRm9/1)

Arsenal
04-22-2013, 3:05 AM
Hide your feelings motherfuckers!

Mr4Speed
04-22-2013, 4:02 AM
Mornin' dudes,
Marcel from the Netherlands here...neck deep in the resto of my 1963 Plymouth Savoy Max Wedge, but needed a bike for summer.....sooooo...picked up a Kawa KZ 750 for a few euro's and put the saw in her instantly. Will post some pics later on.

cheers,
Marcel
www.mister4speed.blogspot.com

Zed
04-23-2013, 11:04 AM
Hey all, I've been perusing CC for quite awhile now and I am just about to start in on my first build! Picked up a "gently" used 79 cb750 and I'm roaring to get started. Going to do a brat style build. First picture is the bike as I got it, second is how she sits now.

Zed
04-23-2013, 11:09 AM
Sorry didn't mean to have the pictures sideways lol

blackstar602
04-23-2013, 11:48 AM
What's up guys! New to Harleys and recently bought a 2013 iron 883 and I've already slapped RSD clip ons and gauge relocation kit. Next is engine management and weld up a custom 2 into 1 exhaust. Going to make this a bobber style bike and going to do a 1250 conversion sometime next year.

Love all the inspiration and knowledge this site has.

meathead75
04-23-2013, 6:16 PM
Just got my first chopper. Not quite a chopper yet but just got it a month ago. I live in Jefferson city MO where its cold as shit. and rainy too. Ill ride when its over 55 . Anyway my bike is a hybrid lol. KZ100o motor in a amen savior frame. Its a little better than a hardtail but still beats me up pretty good. Just thought id say high. Pic of it in my profile.

BuddhahoodVato
04-23-2013, 6:22 PM
Just got my first chopper. Not quite a chopper yet but just got it a month ago. I live in Jefferson city MO where its cold as shit. and rainy too. Ill ride when its over 55 . Anyway my bike is a hybrid lol. KZ100o motor in a amen savior frame. Its a little better than a hardtail but still beats me up pretty good. Just thought id say high. Pic of it in my profile.

Bien venidos cowboy, trippy looking scoot. Good job. Enjoy.

scottyj1
04-25-2013, 7:10 PM
just found this site and wanted to check it out.

here are my bikes

1982 Ironhead

1980 cb650
the red one is my inspiration for my black cb 650

scottyj1
04-25-2013, 7:13 PM
here is my 1980 cb650,bought for 250 bux

sprungfx
04-26-2013, 11:00 AM
Hey, new to the board. From New Mexico. Here to see stuff, learn stuff. This is my FX springer.

blackstar602
04-26-2013, 5:13 PM
here is my 1980 cb650,bought for 250 bux

Very nice! I'd love to get a project like that and build a tracker

swade41
04-26-2013, 8:41 PM
Hey, new guy here, been 10 yrs since my last shovel, bought myself another for my Christmas present. Bought the last one and looking to build this one, I'm a hot rod car guy mostly but missed my bike. Learning my way through it for sure but not to scared to dive in.

TrashClass
04-29-2013, 1:13 PM
New guy here just wanted to say hello and i look forward to being a part of this community.

Living in Los Angeles riding a 94 sporty 1200

38943

38944

I don't know much but i like to wrench an do my own work and id help anyone to the best of my ability. Starting on my first projects with my sporty this summer, super low budget but keeping my fingers crossed.

good to meet you all

RexCharger
04-30-2013, 7:13 PM
Just got my first chopper. Not quite a chopper yet but just got it a month ago. I live in Jefferson city MO where its cold as shit. and rainy too. Ill ride when its over 55 . Anyway my bike is a hybrid lol. KZ100o motor in a amen savior frame. Its a little better than a hardtail but still beats me up pretty good. Just thought id say high. Pic of it in my profile.

I would be severely limiting my riding days if i had the threshold at 55. :-)

Welcome.

thegray
05-01-2013, 7:46 AM
Another new guy here. Been lurking for a while, but just got membership. I was originally reading through the forum looking for ideas for my fatboy, but after the dealer's mechanics and another independent shop both couldn't resolve an issue my bike was having I took it upon myself to fix it - found out that I really like getting my hands dirty.

I'm a total noob, but I like to bite off more that I should be able to chew, so I recently picked up a 1980 CB900c and a 1978 GS550e for $250 a piece. The GS550e is in bad shape (been sitting for 10+) years, but the Honda just had an electrical gremlin and I already got that sorted out so now I'm cleaning it up and working on modding it and making it run better.

Anyway... glad to be here finally.

davecl1983
05-01-2013, 7:03 PM
What's up people I'm new to this site. I've been riding all my life and I'm getting ready building my first bobber soon. This site will be a big help with the tech stuff.

bikewoods
05-02-2013, 1:02 AM
Another newbie here.

Born and raised in Santa Barbara, Ca. Recently got myself an XS650 project, hoping to get riding soon. I'll throw up some photos eventually.

I love long walks on the beach, piña colada's and getting caught in the rain.

wnrn
05-02-2013, 3:22 AM
Hi,

Been lurking here for some time. Thought it was time I posted something... SOMETHING..

Ride a de-nuded part cafe'd Suzuki 1200 Bandit.

Building a Honda CL450 into a Brat.

HoustonAsshole
05-02-2013, 7:07 AM
Hey, New weirdo here. I've been lurking CC for a while and decided I would make an account on the completion of my bike. Got a '76 XS650 and now I'm at the point where I'm trying to register her with just an MSO for the frame and a bill of sale for the motor. Trying to do it up here in KY while I'm here for a few months, if it doesn't happen I'll try down in Texas when I get there. Anyone have any suggestions to make this process easier?

Weldedandhammered
05-02-2013, 9:28 AM
New to the forums wanted to say hello and looking forward to contributing and being a active member.

jwdeuce
05-02-2013, 3:28 PM
Hello all, name is Justin Walls from Columbus Ohio. Im the owner and runner of Balls To The Walls Hardcore Fabrication, I build/restore/chop mostly 70's and earlier cars and bikes. I havent had much time in the last year or so to post on any forums, but hopefully I can give some input into this one! Ive herd a lot of good about it for a while now, so time to see what all the fuss is about! here are a couple pics of a few bikes ive built in the last coupe years:

http://i57.photobucket.com/albums/g220/jw_deuce/DSC_2246_zps4da09c55.jpg (http://s57.photobucket.com/user/jw_deuce/media/DSC_2246_zps4da09c55.jpg.html)


http://i57.photobucket.com/albums/g220/jw_deuce/DSC_2241_zps1fe76521.jpg (http://s57.photobucket.com/user/jw_deuce/media/DSC_2241_zps1fe76521.jpg.html)

http://i57.photobucket.com/albums/g220/jw_deuce/DSC_2243_zpsdecaae97.jpg (http://s57.photobucket.com/user/jw_deuce/media/DSC_2243_zpsdecaae97.jpg.html)

http://i57.photobucket.com/albums/g220/jw_deuce/DSC_0528.jpg (http://s57.photobucket.com/user/jw_deuce/media/DSC_0528.jpg.html)

http://i57.photobucket.com/albums/g220/jw_deuce/DSC_0214-2.jpg (http://s57.photobucket.com/user/jw_deuce/media/DSC_0214-2.jpg.html)

http://i57.photobucket.com/albums/g220/jw_deuce/DSC_1217-2.jpg (http://s57.photobucket.com/user/jw_deuce/media/DSC_1217-2.jpg.html)

http://i57.photobucket.com/albums/g220/jw_deuce/DSC_0732.jpg (http://s57.photobucket.com/user/jw_deuce/media/DSC_0732.jpg.html)

http://i57.photobucket.com/albums/g220/jw_deuce/DSC_1205-1.jpg (http://s57.photobucket.com/user/jw_deuce/media/DSC_1205-1.jpg.html)

Thanks for looking!
-Justin

konarider719
05-03-2013, 9:30 AM
What's up? I'm looking forward to really using the forum, as I'm eventually going to start a Shovelhead build. That is as soon as I have money.

timxxx
05-03-2013, 2:03 PM
Just picked up my first Harley. 96 Sportster Xl1200. So stoked to get some good rides in this summer.

Looking to put mid controls on it, change the exhaust (i want to be able to do 2 riders) and different paint/bars.

http://i1340.photobucket.com/albums/o729/timdove/11829_10152780592635436_1520598708_n_zpsa08b407d.j pg

linkage13
05-04-2013, 5:58 PM
Hey guys, just wanna say I look forward to learning from,and gettin to know the people in the community. I'm not a mechanic, or as amazing at fabricating as some that I see on here, but I am currently building 73 XS650, and I must say, it's been good fun so far. I'll post some pics once I get to a real computer.

xsrick
05-04-2013, 8:58 PM
Hello all, name is Justin Walls from Columbus Ohio. Im the owner and runner of Balls To The Walls Hardcore Fabrication, I build/restore/chop mostly 70's and earlier cars and bikes. I havent had much time in the last year or so to post on any forums, but hopefully I can give some input into this one! Ive herd a lot of good about it for a while now, so time to see what all the fuss is about! here are a couple pics of a few bikes ive built in the last coupe years:

http://i57.photobucket.com/albums/g220/jw_deuce/DSC_2246_zps4da09c55.jpg (http://s57.photobucket.com/user/jw_deuce/media/DSC_2246_zps4da09c55.jpg.html)


http://i57.photobucket.com/albums/g220/jw_deuce/DSC_2241_zps1fe76521.jpg (http://s57.photobucket.com/user/jw_deuce/media/DSC_2241_zps1fe76521.jpg.html)

http://i57.photobucket.com/albums/g220/jw_deuce/DSC_2243_zpsdecaae97.jpg (http://s57.photobucket.com/user/jw_deuce/media/DSC_2243_zpsdecaae97.jpg.html)

http://i57.photobucket.com/albums/g220/jw_deuce/DSC_0528.jpg (http://s57.photobucket.com/user/jw_deuce/media/DSC_0528.jpg.html)

http://i57.photobucket.com/albums/g220/jw_deuce/DSC_0214-2.jpg (http://s57.photobucket.com/user/jw_deuce/media/DSC_0214-2.jpg.html)

http://i57.photobucket.com/albums/g220/jw_deuce/DSC_1217-2.jpg (http://s57.photobucket.com/user/jw_deuce/media/DSC_1217-2.jpg.html)

http://i57.photobucket.com/albums/g220/jw_deuce/DSC_0732.jpg (http://s57.photobucket.com/user/jw_deuce/media/DSC_0732.jpg.html)

http://i57.photobucket.com/albums/g220/jw_deuce/DSC_1205-1.jpg (http://s57.photobucket.com/user/jw_deuce/media/DSC_1205-1.jpg.html)

Thanks for looking!
-Justin

I like

phantomrider
05-05-2013, 3:55 AM
Hello everybody , my name is Duane I come from the south coast of England and am currently riding a 75 xlh bobber.

Cheney1
05-06-2013, 10:54 AM
What's up, names chris, new to chop cult. Been creeping on here for over three months now so I thought it was time to join! As of right now I've only built two bikes, Cb750 rigid and a Kawasaki KZ650 cafe. My current bike I'm building is a 1975 Harley Davidson sportster basket case and my buddies 1957 HD K-model. Looking forward to talking with everyone and hopefully making it to some CC events!
-chris

thebcb
05-07-2013, 12:53 AM
Hi. I'm Kevin. I ride a 99 softail and I'm working on a 74 sportster basket case.

Black
05-07-2013, 3:26 AM
Hi guys, Filip from Czech Republic, mother of the Pilsner beer here! I have been venturing this web for last three years and it was my big inspiration for my first build, honda zoomer-in US better known as honda ruckus.
http://img2.rajce.idnes.cz/d0202/3/3615/3615313_df75916f5ae9a8fea90e2a91df54b354/images/DSC_6858_DxO.jpg?ver=0
In any case, the bike bug has bitten me hard so last year I bought my first serious bike, XL 883 rebored to 1200, 1996 which will be ripe for chopping in upcoming months so I am sure I will need your help and thoughts!

:cheersmate:

pvirga88
05-07-2013, 8:08 AM
Hey All,

New to the Forum just picked up my first Harley 2013 Iron 883. I was always a sport bike guy but after hurting my back couldn't lean over the tank anymore. I know should have gotten a more comfortable bike but it's entry level and was in my price range. It's pretty comfortable too at least to my standards.

http://i267.photobucket.com/albums/ii305/pvirga88/2013-04-09124337.jpg

I do have a project in the works my father has a 1978 Kawasaki KZ650SR its a pretty rare bike we are both looking to restore it to it.s former glory. good thing is the paint is in perfect condition for its age no nicks or scratches just the chrome is shot to all hell... Bike runs great too... We cleaned and rebuilt the carbs, changed the oil and filter and the bike started right up after 18 years of sitting. Only has 6500 original miles and the OEM tires (No Flat Spots or Dry Rot) on it too... I will post a picture of it soon havent been down and the dad house in a couple of weeks.

nemofree
05-07-2013, 9:59 PM
New wrench turner w/a metric form Henderson NV here, I picked up an 82' v45 Magna on the cheap "$425 total" and I want to chop the crap out of it but first I must gut it, clean it and exorcise the demons out of it.
Hopefully in a few months I will have a running rat rod chop.
http://i1274.photobucket.com/albums/y437/nemofreeman/db43d4ca-3730-4123-89fb-9b1b4dc10017_zps2a271cc1.jpg

thebreez
05-10-2013, 5:36 AM
Found this site when I googled FXR images. I have a 94 FXRP windshield model, that still is mostly the same as when it was a cop bike in Sunrise FL, except she has been "souped up".
The guy I got her from said that with him and his wife the bike has 500+ pounds to carry so he built her for low to midrange torque. Still 80 inches with SE heads, 10 to 1 comp, 42 Mikuni, EV46 cam,
2into1 BUB, SE single fire, K&N filter.

jware
05-11-2013, 4:57 PM
Been on CC for awhile, but never posted. Figured its time. From central Mass. I've got an '87 Sporty project that has been on hold sitting in storage the last couple years. Finally got some garage space where i'm renting right now for the bike and tools so I'm hoping to plug away at this thing and get it going.

I'll try and post a build thread sometime soon with some more recent pictures and progress.

<img src="http://farm7.staticflickr.com/6066/6153897592_af520d7d41_z_d.jpg">

RP905
05-12-2013, 5:44 PM
New guy outta Hamilton, Ontario. First year riding and loving it.

GueroBorracho
05-13-2013, 8:19 AM
New guy checking in. Heard about the CC all over the place, figured I'd better get in here and connect with the two-wheeled world. I've run into members during my travels, and from what I've seen, great folks. Been living in WHYoming 7 years, riding something since I was a lad. Originally from Long Beach, CA. Spent a lot of time with my Granddad in the Mojave and Elsinore in the '70s watching him ride Bultaco and Hodaka dirt bikes (I still have his desert leathers). That's where the bug bit me. Wasn't until about 5 years ago I got into road bikes, and I haven't looked back. Absotively LOVE it, and have met some awesome people because of it. Currently on a High Noon that I haven't stopped tinkering on since I got it. There's several ground-up projects spread throughout my garage too.

See out there.

Güero Borrachó

<a href="http://smg.photobucket.com/user/ifixphns/media/ChopCult/garage.jpg.html" target="_blank"><img src="http://img.photobucket.com/albums/v432/ifixphns/ChopCult/garage.jpg" border="0" alt=" photo garage.jpg"/></a>

BuddhahoodVato
05-13-2013, 9:01 AM
Horale Guero, welcome to the cult. tuff as fuck garage, i have a tiny spot.

PPG9944
05-15-2013, 6:17 AM
My name is Pawel. I've been hanging out on this site for a while now picked up some great tips from the people posting on here. After I went down last year and finally decided to get back onto 2 wheels I decided to pick up an older Shadow and decided to "modify" it. All I'm waiting for is my paint to come in then once the paint job is done before and after pics will be posted. Cheers.

xpeterockx
05-15-2013, 3:44 PM
Hello from Ft. Liquordale, Gunshine State.Been in the Harley biz for over 12 years. Like what I see on here. Keep up the good work.

vespa
05-15-2013, 7:24 PM
Hello,

Long time Rider / Builder. Started in the 70's with Bridgestone, Benelli and Honda CA's. Moved onto Suzuki GT's and GS's after college. Then spent some time with KZ's.

Kids and Career thinned the motorcycles until the late 90's and seriously started riding again. I rode daily up until Sept 2006 when my luck ran out. A Female cager crossed centerlane and my injuries were extensive with part of my right posterior leg lost to a barbed wire fence. The Moto Guzzi 500 was a complete loss.

Up until that time I'd finished restoring a couple motorcycles including a 1982 KZ1000R1 Eddie Lawson Replica (Yes a real one) and a 1979 GS1000 Wes Cooley replica.
I also had a few newer Motocycle being garage queens.
1999 Triumph Sprint ST
2001 Big Dog Pit Bull
2006 Paul Smart Ducati 1000
2007 BMW Boxer Cup
1999 Moto Guzzi Bassa
2004 Moto Guzzi Rossa Sport.
Sorry those were bought not built. Don't hold those against me.
My teenage son had also restored a couple smaller Suzuki's
1972 TS185 Sierra
1974 GT250 Hustler

A divorce/depression and injuries caused the liquidation of most of my sweethearts.
Now things are better and professionally I'm where I need to be. Building again.
Last year it was a 1980 XS850 named "XXXS" and Now "TurboMax"
My building style is different than others. Not sure how one would classify the bikes. Cafe Racer/Bobber/Bastard/Cheap? I do all my own work including powdercoating.

Pics of some lost beauties. I'll start a build thread of My current project.
http://i20.photobucket.com/albums/b234/TurboN2O/Motorcycles/motorcycle010.jpg (http://s20.photobucket.com/user/TurboN2O/media/Motorcycles/motorcycle010.jpg.html)
http://i20.photobucket.com/albums/b234/TurboN2O/Motorcycles/motorcycle011.jpg (http://s20.photobucket.com/user/TurboN2O/media/Motorcycles/motorcycle011.jpg.html)
http://i20.photobucket.com/albums/b234/TurboN2O/Motorcycles/motorcycle027-1.jpg (http://s20.photobucket.com/user/TurboN2O/media/Motorcycles/motorcycle027-1.jpg.html)
http://i20.photobucket.com/albums/b234/TurboN2O/Motorcycles/starbird005.jpg (http://s20.photobucket.com/user/TurboN2O/media/Motorcycles/starbird005.jpg.html)
http://i20.photobucket.com/albums/b234/TurboN2O/Motorcycles/varied366.jpg (http://s20.photobucket.com/user/TurboN2O/media/Motorcycles/varied366.jpg.html)
http://i20.photobucket.com/albums/b234/TurboN2O/xs850/xsproject048.jpg (http://s20.photobucket.com/user/TurboN2O/media/xs850/xsproject048.jpg.html)
The Current Project;
1981 Yamaha Maxim with Turbo.
http://i20.photobucket.com/albums/b234/TurboN2O/null_zps6f2903d6.jpg (http://s20.photobucket.com/user/TurboN2O/media/null_zps6f2903d6.jpg.html)
http://i20.photobucket.com/albums/b234/TurboN2O/null_zps93db6a36.jpg (http://s20.photobucket.com/user/TurboN2O/media/null_zps93db6a36.jpg.html)
http://i20.photobucket.com/albums/b234/TurboN2O/null_zpsf852c4ee.jpg (http://s20.photobucket.com/user/TurboN2O/media/null_zpsf852c4ee.jpg.html)

I'll be around awhile. If you have any questions please let me know. I'll check out everyones cool builds.

DiscoDeuce
05-15-2013, 7:32 PM
hey whats up guys, just droppin a line and sayin whats up. here in North Colorado and LOVE the site and the info that yall give! great stories and awesome help.
no sick chop yet but will be starting a pan here soon with the help of some of the old timers that i grew up around. between them and you guys im sure ill have one hell of a bike to piss the "bikers" off over at the HD stealership lol.

always up to ride and starting june 14 im rollin down to vegas with a buddy on the bikes to raise some hell in sin city for a week! lookin forward to bull shitting soon!

WBGelbke
05-16-2013, 5:30 AM
Hey,
Central Jersey Coast checkin' in. How ya's doin'?

chopit25
05-16-2013, 9:53 AM
Hello everyone. Getting familiar with the site as i heard this was a great resource. My current project is a chopped 1973 tx650 straight from the seventies that needs lots of work. I have been away from bikes for quite a few years now but the kid is bigger now and i thought it was about to get dirty again. I have owned xs650's and cb750's, stock and chopped. A virago. A chopped norton commando and a gl550 silverwing. I will post some pics as soon as i get more familiar here.

mosthuman
05-20-2013, 1:03 AM
Hey guys and gals, names Tim, love this site. Been really helpful so far. Hopefully ill learn enough from this place to be of some use to someone later. I found this really badass site to get wiring diagrams and service manuals for free. Here it is:http://forums.sohc4.net/index.php?topic=17788.0

Massyamaha
05-20-2013, 8:09 PM
Names Ryan, ride in Massachuesettes. I enjoy Beers and Bikes. Just posted my bike in the Japanese forum.. i know I know, its a Virago..but you would never know.

BSAshovel
05-20-2013, 8:31 PM
new here, I have a 76 project hardtail shovelhead, and bought my wife a 71 BSA hardtail project, working on as time & money allows, found this site looking for information for the BSA.

not bad on fabricating my own parts, pretty well versed on shovels, however dont know anything about BSA, so I have alot of learning to do.

Randy

BZH4life
05-21-2013, 3:27 AM
Hi,

New french member, I curently have a LS650 bobber that I am selling in the coming weeks and I will then buy a dragstar 1100 to do some magic with it (or at least try to...)

EvilGord
05-21-2013, 9:23 AM
gnarly site inspiring me to chop up my nightster a little more and get back on the wagon withmy old CB! heres my sporty as it sits, planning on a flat bottom peanut tank and bobbing the fender

Duffyleg
05-21-2013, 9:28 AM
Hey everyone, first post, first harley. Can't wait to join the community.

Duffyleg

cvoleo
05-22-2013, 8:25 AM
Good morning,

Been riding for some time and always wanted to build out my own bike. Just picked up a 2005 Sporty 883L.

You guys seem like you have a lot to offer.

Looking forward to the project.

Leo

fitzy
05-22-2013, 11:23 AM
Fitzy here from Saskatchewan! Just want to say hi and love this site! Like to see a place where people like me can sorta get together and talk all stuff cool!

Arisaka
05-22-2013, 12:53 PM
Hi everyone! Thanks for accepting me into the Cult. Been running Ironhead Sportsters and BSAs since I was about 16, haven't grown out of it yet. Thanks!

ZombiiBite
05-22-2013, 4:38 PM
Hey guys I've admired motorcycles since I was a kid and now that I'm 27 I'm looking to get my first bike and start a nice bobber project. Any tips for someone starting out on what I should look for?

razor78016
05-22-2013, 10:52 PM
Hey guys I've admired motorcycles since I was a kid and now that I'm 27 I'm looking to get my first bike and start a nice bobber project. Any tips for someone starting out on what I should look for?

Welcome Aboard!
Look for an old school Shadow heh, but then again I'm partial to old school Hondas lol.

ZombiiBite
05-23-2013, 2:12 PM
Welcome Aboard!
Look for an old school Shadow heh, but then again I'm partial to old school Hondas lol.

Thanks I'm actually looking at a 1987 Magna now, just got to try to talk the guy down he's asking $2700 but from what I've looked up its worth is $1900 in pristine shape. It has a golf ball sized dent on tank and 22,000 original miles.

Hyde802
05-23-2013, 3:11 PM
Been on the forum for a bit, but never made a "hello" post. Ive owned a few old Japaneses bikes, but these are my first harleys.

I have a 05 FXSTC that I ride about 15k last year, from may till the snow falls. Its got the dreaded 05 Valve seals that are leaking, so Ill be tearing into that in a few weeks.

http://i179.photobucket.com/albums/w282/ediblecrayons03/Harleys/temporary_zps51977794.jpg

http://i179.photobucket.com/albums/w282/ediblecrayons03/Harleys/temporary_zps5d04a56e.jpg

http://i179.photobucket.com/albums/w282/ediblecrayons03/Harleys/temporary_zpsd0e9075f.jpg

I do a lot of off roading, so while helping a buddy get his Jeep ready for the season, I looked over and saw a head tube poking out from under the rubble, I asked about it and found out that it was left by some one that the family had a falling out with, song and dance later and its in the back of my truck heading home. Its gonna need work, the cylinders are a little rusty and its been sitting for a loooong time. From what I can tell, its a 72 Iron head engine. +5 P&P girder front end, +2 top and down tube streched frame, believed to be a paugcho, but there are no markings on it at all. Looks like it was in the process of being turned into a chopper when it was put in storage.

Its not really chopped that much, the trees are just resting on the frame.

http://i179.photobucket.com/albums/w282/ediblecrayons03/Harleys/temporary_zps03c2b859.jpg

http://i179.photobucket.com/albums/w282/ediblecrayons03/Harleys/temporary_zps84c4153d.jpg

And how I found it:

http://i179.photobucket.com/albums/w282/ediblecrayons03/Harleys/temporary_zpse16087a6.jpg

Pretty excited to dig into this project, last time this bike was on the road (guessing by the sticker on the plate) was 1981

Looks to be alot of good information on this forum, Im sure Ill be using that search button soon!

See ya around! -Caleb

anatram
05-24-2013, 8:14 AM
New guy here from Texas, I do all my own work, and can fab some pretty decent stuff. I've done alot of offroad work in the past, (buggys, rockcrawlers)

Was riding a ZX10, got old and tired of being hunched over, sold it and bought an 07 XLC, since I purchased it there's not a weekend that goes by I'm not doing something to it. Bar swap, riser swap, fender chop, easy stuff for now.

Currently looking for another one on the cheap to completely chop up. Thinking about raking the neck, slamming it to the ground, fat tire kit in the rear, wide glide trees with a fat boy front end, dropping the speedo in the tank, flat black, and a brushed stainless/aluminium look. Similar to a Mithchell bike.

Man this hobby is like catching VD, it's contagious, can get expensive, but dam I have a good time doing it.

rgrhoward
05-24-2013, 9:20 AM
Just picked up a basket case 86 FXR, my cousin told me about the site. Man ia m glad he did, there is some really great info on here!

This is not my first bike, had a few different over the years. Softtail, Hardail Pan, and a Roadking. I am stoaked to build up this FXR! My favorite thus far for sure.

I look forward to the great advice, ball busting, tech info i am going to get.

RobertJames8
05-24-2013, 11:10 AM
Hello all I'm a 31 yr old from Indiana been ridin my whole life. I'm a Marine corps. Vet and now a railroader. I love all things mo'sickle and have been checking this forum out as a nonmember for a long time, pleased to have finally joined!

razor78016
05-24-2013, 11:15 AM
And how I found it:

http://i179.photobucket.com/albums/w282/ediblecrayons03/Harleys/temporary_zpse16087a6.jpg

Pretty excited to dig into this project, last time this bike was on the road (guessing by the sticker on the plate) was 1981

Looks to be alot of good information on this forum, Im sure Ill be using that search button soon!

See ya around! -Caleb
Really nice find there Caleb. If you never get it up and running, still be a bad ass convo piece to have in the shop.

Also Welcome Aboard guys!

tradrockrat
05-24-2013, 12:03 PM
Hey all, I'm Trad, and I'm new to the forums. Just wanted to say hey, introduce myself, and say thanks for having such a kick ass forum.

I'm gonna be posting some stuff about my SR build in the associated greasy dozen build thread, but I hope to hang out in other threads and maybe even contribute a little.

I wouldn't call myself a "Builder" by any stretch, but I have done some serious mods to a few of my bikes, and do all my own wrenching, etc etc.

So there it is - thanks for having me, and let's build some bikes!

BamaHellbilly82
05-27-2013, 8:48 PM
Hello all I'm a 31 yr old from Indiana been ridin my whole life. I'm a Marine corps. Vet and now a railroader. I love all things mo'sickle and have been checking this forum out as a nonmember for a long time, pleased to have finally joined!
RobertJames8...Semper Fk'n Fi Devil!!! Nice to see some brothers of the Corps around here. I'm new here myself...Happy Memorial Day (though technically it's for memory of the fallen)!

LeadfootLambert
05-28-2013, 7:10 PM
New old guy here, my name is Scott, I currently have 3 bikes, a new street glide, a 04 Bourget pro street and a 75 Ironhead sporty, The sporty is what brings me here, I bought it in a box off craigslist for a couple hundred bucks a couple years ago, I built it in my basement over the winter and rode the hell out of it last summer, I'm thinking about maybe making some changes like maybe some apes and loosing the forward controls, what do you guys think?
file:///C:/Users/User/Desktop/CIMG5841.jpg
Sorry, pic won't load, somethings wrong with my computer

c0b2a
05-29-2013, 3:18 PM
New here, buddy of mine just told me about the site the other day. Alot of knowledge here it appears.

sleazyrider
05-29-2013, 6:33 PM
Hey new guy here. My name's Will. Been lurking around here for awhile. I've always wanted a motorcycle and after riding dirtbikes in the desert for a few years, I decided it was time for a chopper in January. Bit of a change from the dirt, but I have an '80 XS650 Slimfab built chop. Owning the 650 has taught me alot about working on motorcycles. Looking into maybe building a Harley soon.

disturbed1
05-30-2013, 12:35 PM
41 yr old from n s w Australia ,into B B W aka( bikes booze an women) great site except a couple real dirtballs ,but ya gotta take the good with the bad.

Been checking out site for a while there's some great bikes & talent on here that's why i joined :cheersmate:

TW
05-30-2013, 8:09 PM
Guthrie Oklahoma back here. was on a while back. just checkin back in

afbrian13
06-01-2013, 10:12 PM
Well everybody, guess its time to finally start posting. Been reading through the site and this is for sure the best I‘ve seen period. Great bunch of people who dont give a damn what you build, just how you do it. Since i like all kinds of bikes, cars, etc that works for me!

Anyway, I'm an aircraft electrician (USAF), married,couple kids, live in NE. If your on here and anywhere near Omaha- pm sometime.

I've had a couple bikes. Xl250 duel sport, 76 cb750, and currently 86 vs700. I drive a 76 280z most days, and my Superduty for fetching parts (and snow days:-) )

I'll start a thread for the intruder in the jap section. Not making a bobber, brat, or other bs. Just making it mine.

Thanks for having me. I already learned a ton. Hopefully i can help out others too.

-Brian
.

jermicon
06-02-2013, 1:14 AM
I left newengland and moved to hell (az) for some reason. I have a triumph America a suzuki savage and a xs400, drive regularly a triumph legend tt l, royal Enfield bullet 500 and a honda 150 that my friend owns. Been si gned up here for a bit. Never actully been on the forums. Only one of my bikes are on the road so you'll hear from me.

MrSR400
06-02-2013, 3:08 AM
G'Day Lads,

Another newbie !!

Am an Aussie living in Thailand... loving a heap of your bikes, some awseome chops that are given me a lot of evil thoughts.

Got an SR 400 at the moment that I been playing with but nothing serious like some of you guys.

Picked up an old CB 750 Boldor that Iam thinking of chopping into a Bobber style trike, time will tell though as time Iam short on due tolong work hours.

Anywho a few pics of me current ride.

http://i73.photobucket.com/albums/i208/v8tfcorty/Jerome%20-%20Sr400/20130602_155524_zps60810008.jpg (http://s73.photobucket.com/user/v8tfcorty/media/Jerome%20-%20Sr400/20130602_155524_zps60810008.jpg.html)

http://i73.photobucket.com/albums/i208/v8tfcorty/Jerome%20-%20Sr400/20130602_155613_zps134d2ee8.jpg (http://s73.photobucket.com/user/v8tfcorty/media/Jerome%20-%20Sr400/20130602_155613_zps134d2ee8.jpg.html)

http://i73.photobucket.com/albums/i208/v8tfcorty/Jerome%20-%20Sr400/20130602_155538_zpsf5c1ab4a.jpg (http://s73.photobucket.com/user/v8tfcorty/media/Jerome%20-%20Sr400/20130602_155538_zpsf5c1ab4a.jpg.html)

Koreric75
06-02-2013, 7:51 AM
Hello all, new to the forum and bikes in general. I've been around motorcycles since I was a kid but just decided I needed to buy one recently. I've been looking through the forums and see a lot of awesome chops, innovative ideas and common themes. In a world where being an individual is the clique, chopping out a bike on your own really defines customized.

SlammedSporty883
06-02-2013, 9:42 AM
new guy from texas been riding on 2 wheels since i was 6, had my share of crotch rockets shit got old quick, recently bought a '13 sporty got tired of seeing everyone with the same bike and the same old goodies on it so decided to make it my own, went ahead and raked it to 45 degrees and stretched it about 3 inches, nothing major just didnt want to blend in with everyone else so here she is '13 iron with about 2500 miles on it, all work done in house..

http://i353.photobucket.com/albums/r370/motosik831/76AC4418-7174-4A05-B82A-214F086BFDB5-190-000000EB38780CEB.jpg (http://s353.photobucket.com/user/motosik831/media/76AC4418-7174-4A05-B82A-214F086BFDB5-190-000000EB38780CEB.jpg.html)

http://i353.photobucket.com/albums/r370/motosik831/9EAFDCA5-812A-4D38-B7EE-655328F3695C-190-000000EB44D32CC2.jpg (http://s353.photobucket.com/user/motosik831/media/9EAFDCA5-812A-4D38-B7EE-655328F3695C-190-000000EB44D32CC2.jpg.html)

djblingbling1
06-02-2013, 4:28 PM
^^^That bike is sick!!

Anyway, first post, names Dan, im from OR, currently riding a fairly stock '13 Iron 883.......Before this I had a pretty chopped/bobbed Honda Rebel 250....awesome bike but it was just a bit too small for me, even at 5"7.

I dont plan to go hardcore with the 883, but the plan is once its paid off find an old sporty on craigslist and then swap all the parts over to a ridgid frame with a rebuild in the process, figure it will be a cool project for me and my son, plus my Rebel I rebuilt from the ground up so I will have somewhat of an idea what I am doing, I hope.

Ive been lurking here for a while, some very very cool bikes and builds, I look foward to being here.

blackstar602
06-03-2013, 6:50 AM
http://i353.photobucket.com/albums/r370/motosik831/76AC4418-7174-4A05-B82A-214F086BFDB5-190-000000EB38780CEB.jpg (http://s353.photobucket.com/user/motosik831/media/76AC4418-7174-4A05-B82A-214F086BFDB5-190-000000EB38780CEB.jpg.html)

http://i353.photobucket.com/albums/r370/motosik831/9EAFDCA5-812A-4D38-B7EE-655328F3695C-190-000000EB44D32CC2.jpg (http://s353.photobucket.com/user/motosik831/media/9EAFDCA5-812A-4D38-B7EE-655328F3695C-190-000000EB44D32CC2.jpg.html)

That is a damn nice bike! I can't wait to have the space to start chopping at mine!

scoty
06-03-2013, 5:39 PM
From Arkansas, been lurking for a few days and have already learned a lot. I currently have an 09 geezer glide (Electra standard) and an 85 Suzuki Madura 1200 that is getting ready to undergo some "reconstructive surgery".

I also have a few other chop ideas in mind. I travel for a living and am rarely home so work on anything will be painfully slow.
Scot

geolemon
06-03-2013, 8:29 PM
New to bikes, but not to custom... and that's part of the reason it took me so long.

I hate stereotypes. Don't want the stereotypical Harley, or the stereotypical crotch rocket, I want something unique, and far removed from the dorky wannabe-Harley like so many of the stock jap bikes seem to want to be. Lead, don't follow, right?

I've got a pretty do-everything all-black KLR650 to ride around on while I tear apart my project bike - a Honda CM400 that I picked up gratefully cheap from a longtime buddy of mine who's also a chop cult member (who I used to go skateboarding with 20-25 years ago) who builds some rad high quality old-school style choppers.
For me, I'm picturing a cross between a brat and cafe bike in my head, and want it to be clean in the end. It's got comstars on it which I can paint and differentiate it from a cafe bike and I like the unique shape of the frame compared to the CB400.

Honestly, I'll be pissed at myself if I end up with something that really falls into any of those categories, but I'm open to dipping my brush in any palette of styles as long as they all work together.

Looking forward to learning... well, everything about bikes. Hopefully pick up some tips and tricks, and use my fabrication skills to get what's in my head actually rolling on the pavement.

rebel47230
06-04-2013, 7:33 AM
whats up everyone ive been lurking around off and on for a few years young bike guy here i have owned a few bikes, 2 79 cb750s, a 79 kz1000, a few virago's and a 75 sporty i just sold im lookin to pick up a new ride in the next few weeks thinking about building a cafe racer im hoping to pick up on a lot of tips and tricks from some of you more experienced builders

skidmarkjunkies
06-04-2013, 9:18 AM
Hey Thanks for letting me be a part of the site.
I hope to share some of my Motorcycle experiences and see what other builders are doing too.
Thanks!

trish
06-06-2013, 11:00 AM
Hola. my name is Trish... I've grown up around motorcycles my entire life. Been riding since i can remember. my main bike is the Hellcat - 72 XLCH. but i have a few other projects in the works. I also work around bikes - I own a tattoo shop (My Little Needle Tattoos) which is attached to Plymouth Cycle and Speed in the Detroit area - they are a full service bike shop (fun till you're tattooing and someone gets on the dyno lol!), and I am the Marketing Director for Baker Drivetrain. so always around two wheels! Thanks for having me on the site! xo

ForeverTwoWheels
06-06-2013, 2:58 PM
Hi!

My name is Morten, 22 years old. I'm a Precision mechanic from Norway, Europe. I've been riding a 1986 Sportster with a Flyrite frame for 2-3 years now. I'm saving up for a Panhead and things are looking good this fall... Hope my english isn't too bad.

roadkingsal
06-06-2013, 5:37 PM
Salutations People of Chop Cult - this is the first time posting anything in the forum. Just wanted to say "whaz up" to all you out there. I hope you all are ready for Born Free 5. Almost Forgot, how do you enroll for the Free Stuff Drawings?

spidr
06-08-2013, 12:24 AM
Hm. Never introduced myself on here. This is me.

Thats all I've got.:cool:

Stonzsled
06-09-2013, 5:15 AM
Well fellas I have been on here lurking looking for things of my ultima rigid frame build. There is a lot of useful info on here and if I can figure out how to upload pics I will try to show you some progress If it worked that's what it looked like after I painted frame. Just did the solo seat and working on tanks and rear fender now

inkaddict92
06-09-2013, 9:19 AM
Good Morning gents, I'm an active duty Marine stationed in Camp Lejeune, NC and my dream is to one day build my own bike from scratch. Hopefully, I'll be able to do this after my deployment next year. I currently ride a Honda Shadow and I'm always down to go out on the open road and soak in any knowledge you guys have to offer about anything motorcycle related !

SMO18
06-09-2013, 1:35 PM
New guy from nor cal.Im riding a shovelhead.

tankcalgary
06-09-2013, 9:35 PM
Thanks for having me guys. Been creeping on you guys for a while and thought I better join in. Peter, form Calgary, Alberta. Working on, collecting parts and information for my Shovel/Kraftech and '81 Ironhead projects.

leston
06-10-2013, 9:00 PM
Been on Chopcult for a little but here is the intro.
My names Leston. Just graduated from Auburn University and relocated to birmingham, AL. Riding a 1975 Honda in pretty much stock condition, currently working on getting a '42 harley WLA on the road. Looking for some people to ride with in the area and wrench with. Any local events, shoot them my way. http://www.chopcult.com/leston/albums/9319/83467

Subsect78
06-12-2013, 9:17 PM
Been lurking on Chopcult for a couple of years and finally created a profile. If you live in/around Diamond Bar (Southern California) stop by the shop I run every Friday from 5pm-7pm for a Beer. Always down to meet new people who ride.

Best,
Marc

pnor
06-16-2013, 5:05 PM
Hi, Paul from Paso Robles here. I'm a service and repair plumber and when things got tough in '07 or so, I had to unload my Bonneville (along with most everything else I had that was worth $$ and didn't make me $$). Things are going much better with my personal economy, my business is growing and we're on top of the mortgage (we didn't lose it, even though we bought at the top of the market). :cheersmate: I thought now would be a great time to get back in the game and I've been cruising CL and the local areas for a cheap project. I found a '86 FLT about 30 minutes from me and drug it home. It needs some work for sure. Somebody cut the swingarm in half and lost the rear wheel in the process of triking it. It's also got all of it's FLT goofiness but I've got some vision and I think it'll come out cool. No good pictures of it yet but here's a few of my last few bikes.

'71 Bonneville
http://img.photobucket.com/albums/v232/p-nor/1971%20boneville/rightside92907.jpg

'73 CB750
http://img.photobucket.com/albums/v232/p-nor/cb750/cb755closerup.jpg

I miss both of them but this ugly beast is my new mistress.
http://img.photobucket.com/albums/v232/p-nor/bike_zps2d05fa29.jpg







Paul

BobberInspiration
06-17-2013, 1:34 AM
Hi everyone. Jonas from Sweden.

I bought a Honda Shadow 600 that I'm planning to turn into a bobber this summer. I started looking around for inspiration for this project a few months back. I saved all the nice bikes I found on a site, and now I have over 1300 pics of bobbers and café racers there.

Feel free to check it out here: Bobber (http://bobberinspiration.com) Inspiration

Jsin
06-18-2013, 4:14 PM
Greetings from Idaho! My name is Jason and I'm the hellish mormon run land of Idaho Falls. Been creepin around the forums for a while getting inspiration and mechanical advice. Currently I am chopping a 2004 evo sporty with a kind of Crazy Orange/ Brat style influence. Figured I would finially get around to doing an intro post

Buckshank
06-20-2013, 6:01 PM
Hey fellas, names Boone. I'm living in the Fort Smith area of Arkansas. I've been riding motorcycles my entire life and my current is a Road King rat. I just picked up a 98 heritage in a box and I'm looking to build a one of a kind. Looks like there is a lot of knowledge here, I'll have lots of questions.
Regards,

JGalvez
06-22-2013, 12:38 AM
Hi.

My name is Jose from Mexico city. My ride is a 2002 sporster. Yes I know, a fucking sporster. But I really like to ride it. I'm not new to motorcycles, been riding for the past 34 years ( now 46).

Anyway. Cheers from Mexico city. :cheersmate:

jaybird74
06-22-2013, 3:16 PM
New member from Calgary, Alberta! Dealing with the floods up here has been crazy!!! Ride a 2010 Iron. Done a few customizations and always have more to do!! Good vibes to all here at Chopcult!!

powtekfm
06-22-2013, 3:55 PM
Fast fred here ,newby to forum. How many Ness rocket tanks were built? Can somebody send me pics with some dimensions?

coeysgarage
06-23-2013, 5:02 AM
yo my names cohen from Gold Coast australia.
got a couple of bikes looking to buy another off this forum. wondering how im able to PM people?

cohen

turbomustang84
06-23-2013, 6:29 AM
New here from Albuquerque I ride a 2000 sportster 1200 but have owned makes from all over the world and loved them all http://img.tapatalk.com/d/13/06/23/du7eqe2e.jpg

Sent from my SPH-L900 using Tapatalk 2

Helmeto
06-24-2013, 6:03 AM
Hey all, just a quick intro, I'm in Southampton UK, been on & off the site for a while but finally signed up. Just picked up a '76 hardtail Ironhead after riding for a few years on a Bandit 600 chop. Looking forward to getting some tips, help & general banter and to be getting the spanners greasy again after a far too long a break.

Cheers all :cheersmate:

Paul.

marktore
06-24-2013, 11:03 AM
Hey... New member here, I've been riding bikes since the age of 11 and after 3 years wihout one I picked up a 1980 FXWG. She needs a little loving but hoping to have her back up and running in a few weeks, just needs a little tlc. I will be posting some tech questions and WTB stuff...

Thanks!

Mark Tore
Eastport, NY

magnus
06-24-2013, 12:16 PM
Hi, I'm new here. I'm in Finland in a small town called Lovisa. I've been lurking cc for some time. Just got My license last fall and been riding my 1986 savage since then. Always loved choppers.

kenuto
06-24-2013, 12:45 PM
Hello, first post . I fried my evo now I have a 2013 Twinkam I want to put in it's place. So I am here to find sme data to help me get this done!

wagner
06-25-2013, 10:48 PM
hello. my names john and i'm from pittsbugh, PA. just picked up an 88 sportster and a paughco rigid frame for a new project. i also have a 75 cb750 bobber project that i haven't worked on in a while.

EVOEATR
06-26-2013, 2:04 AM
New to Chop Cult, been seeing' shit on here for months and finally took the plunge. My name is Will, I'm from Capitola, now in Palo Alto (both CA). I inherited my big brother's bike last year, been tore up over losing him since. I've been going through the bike for about a year now; limited time and greenbacks. It sat in the elements in ocean air for about 5 years and has needed a TON of work. The bike was built by Snotty Scotty at Coyote Cycles in Morgan Hill in 1997, registered as a SPCNS ( shut it!). It is a SICK fucking hot rod! Delkron cases, shovel cylinders, STD Panhead heads, 93", suicide shifted dry clutch 4 speed. I've ridden bikes since 1992, but I am learning to ride this one, little by little as I haven't gotten it quite "reliable" yet. Anyway, I'm kind of ramblin' on...looking forward to meeting up with like minded gear heads in my area, and getting/giving help to all others. See y'all around!

EVOEATR
06-26-2013, 2:09 AM
Awesome! I've got lots of fam in Southampton! I'm hoping to visit someday. Ever hear of BSA? Hahahahahahahah!

jagxl1
06-26-2013, 5:20 AM
New here, from Kalamazoo Mi. I currently have two sportsters one is a 2004 and the other a 1972. I have done quite a bit of engine work to the 2004. Actualy Frank Romero (Crazyhorse) did all the machining and porting to the engine and put the recipe together, I just did the wrenching. The bike is fast as hell. The 1972 was Crazyhorses personal bike that I bought off him when he retired, thats a fast bike to a built buitifuly. The 2004 is currentlt for sale.

Oggie
06-26-2013, 1:33 PM
new here (obviously) born and bred in the san francisco bay area, I'm in the military now stationed in San Diego when im not deployed.Just bought an 03 883 from a buddie, never built a bike before but I have built hot rods so this should be a good learning experience. I'll probably ask some dumb questions, but I've lurked this site and have been impressed with the amount of knowledge on here. Other than all that I enjoy the finer things in life, lik college girls, beer, tattoos and punk rock.

Staninator
06-26-2013, 1:44 PM
Hey all, new bro here from Minnesota! I've been into the chopper scene for a few years but was recently able to acquire a horse for my own. Last summer to be exact. I own an '82 Suzuki GS650 bobber. Been wrenching on it all winter so I could do some great riding this summer. My next project will be an XS650. I hope to keep everyone posted with great pictures when I get something going!

ShadowShovel
06-27-2013, 5:53 AM
new guy here currently deployed to Afghanistan, based out of Ft. Bliss. I've got a 84 Shovel and a 75 ironhead. I've got more plans for the shovel once I get back with the bit of bonus money I got (gave uncle sam another 6 yrs...) and the ironhead is a project. Profile pic is a bit of painting I did my last deployment. Great forum with lots of good info!

JPierce84
06-27-2013, 6:10 PM
New guy from Winston Salem, NC. My name is Joe. I've been interested in bikes for years and just bought my first bike a few weeks ago. 2005 Sportster 1200. Looking forward to learning everything I can about them and I hope to one day build a killer old school bike.

SNOT275
06-27-2013, 10:27 PM
Hey guys... Been a long time lurker on this site and just now finally decided to sign up. I'm a hot rod guy through and through and after the military started apprenticing at a hot rod shop. Been building a 29 Roadster and have always wanted a bike... Well, now since I'm building my roadster at the shop, figured I would build a bike at home to take up that time... I've done a lot of research thanks to this site and I think it's time to actually get to work. Look forward to receiving more help from all of you knowledgable guys on here.
-Chris

gillette
06-28-2013, 8:01 PM
Hi I have been lurking for awhile. I am in the process of buying an 89 sportster. I have had multiple street bikes before this and switching to the cruisers. I have high hopes for the sportster and hoping to create a nice bobber. Thanks in advance for the knowledge I know I'll get.

coolhandgreg
06-28-2013, 8:11 PM
Hey I'm Greg. First post, doing the intro thing. Have Sportster Iron that I'm slowly starting to just now modify after having run close to 12,000 miles, brand new, stock, since last september, but also looking to do a hardtail build in the near future - maybe a rigid evo sporty, maybe an ironhead, maybe a shovel. Still doing lots of research.

Rubberduck
06-29-2013, 5:04 AM
Glad to be here, I've been lurkin for awhile, just finished a shovelhead build.

Rubberduck
06-29-2013, 5:09 AM
she took me over a year

Jnkbyr
06-29-2013, 8:37 PM
Hey guys my names pat I'm from middleville michigan & I have a 1972 sportster Ironhead. Always workin on stuff in the garage & always willing to learn more

memore
06-30-2013, 5:57 AM
Hi my name is Keith
I live outside Des Moines Ia. I am working on a flyrite with an ss shovel and a 74 cb 750.
A lot of good info on here learned a lot.
Thanks

Konablue
06-30-2013, 8:51 AM
Hey everyone, new here. Just bought my first project. 82 csr750 twin. Like the site, and looking forward to my build.

Edster
06-30-2013, 9:20 AM
Howdy folks, I saw this site and all the cool 5HiT on here. I got Superstition my Sporty I bought on the base in Japan. I love to ride, got a wife and three Knuckle heads 6,11,and 14. Itchin to start a project or mod Superstition a little more, but still would like to be able to use her on a trip.

cncannone
06-30-2013, 9:58 AM
Name's Chuck. I've messed around with Sportsters for a few years now, finally decided to go all in on starting with a hardtail frame build. Bought a house right before I deployed and since I got back my garage has been begging for a project. Picked up a '97 1200 with 22k miles on it for short money and have a frame on the way from Paughco. I'm stationed at Fort Lewis and live in Tacoma so if you're in the area drop a line.

stumpyxs
07-05-2013, 8:26 AM
Hi guys my name is rauby. I'm into anything old school. I'm from Indiana. I have a 1980 xs650 I'm in the middle of building.

WingNut
07-05-2013, 8:41 AM
Howdy folks, I saw this site and all the cool 5HiT on here. I got Superstition my Sporty I bought on the base in Japan. I love to ride, got a wife and three Knuckle heads 6,11,and 14. Itchin to start a project or mod Superstition a little more, but still would like to be able to use her on a trip.

Around here, when you say you have three knuckleheads, not even one person is thinking about kids.

MrEd
07-05-2013, 12:08 PM
Ed from South Carolina.

fourspeed
07-05-2013, 6:49 PM
I'm Steve from Eastern Pa.I ride an 84 Ironhead.Noprojects.:cheersmate:

CuPTaTeR
07-06-2013, 8:56 AM
hey guys Jeff from Bristol tn (hickory stump) built and owned a couple of bikes with the help of a good friend. just picked up a 76 ironhead project ( for better or worst ) ready to build my first Harley................any insight or wisdom anyone could throw my way is always welcome

Wrench67
07-06-2013, 1:06 PM
What's up gear heads! My names Sam and I'm from Cleveland. New to the chop cult websites and forums but so far I'm loving everything on this site. I build old school rigid sixties and seventies style choppers. If anyone else is from the area send me a message. My lady and I are always looking to meet people to ride with or hang out and wrench on bikes. Take it easy brothers and sisters!