PDA

View Full Version : Rewireing My Bike, Help Me!!!



hugodv01
09-22-2009, 11:53 AM
I am trying to rewire my 94 sporty. The repair manual is confusing the fuck out me with the diagrams and little numbers etc etc. My brain is too small to figure this out. So, any one know of a good book, manual, dvd, youTube video that can hold my had threw this process???

I guess I am looking for an idiot guide.

Thanks

.p.s I already looked all over the forums and I could not find this topic. If i missed it can somone please point me in the right direction.

Thanks Again.

Rudehog
09-22-2009, 5:38 PM
What exactly are you trying to do?

JoeTCreep
09-22-2009, 6:09 PM
Check this out. I rewired my best friends Ironhead with this. The diagrams dont get any easier. Let us know how it goes.

http://www.jammerclub.com/nohassle.htm

hugodv01
09-22-2009, 6:18 PM
What exactly are you trying to do?

I just want to clean up my bars and move starter under seat without spending $200 bucks on a wireing harness.

I have a bag of automotive switches and wires and a crimper and electrical tape and $40 bucks at my disposal.

hugodv01
09-22-2009, 6:21 PM
Check this out. I rewired my best friends Ironhead with this. The diagrams dont get any easier. Let us know how it goes.

http://www.jammerclub.com/nohassle.htm

This is what I was looking for.

Thanks!

kingdeadbeat
09-22-2009, 6:27 PM
Use some of that $40 to get a solder gun and some heat shrink....Don't be a hack, you'll regret later...

JoeTCreep
09-22-2009, 6:32 PM
Good to hear! Its a great help alot of the time and its easy to follow.
I'd also reccomend soldering your connections wherever you can. Takes a little longer, but comes out much nicer. Even if you have to practice a bit on a few ends, its worth it and strangely satisfying.

hugodv01
01-08-2010, 11:59 AM
SwitchBox is wired with Key On/Off, Start Button, High/Low. It is mounted where horn used to be.

Everything is working great. I have however noticed just recently the switchbox heats up ALOT.

Is this normal?
Is this because of proximity to motor?
Should I be worried?

Thanks.

DirtFloorJim
01-08-2010, 12:31 PM
Check this out. I rewired my best friends Ironhead with this. The diagrams dont get any easier. Let us know how it goes.

http://www.jammerclub.com/nohassle.htm

Great link! Bookmarked. Thanks

earz
01-08-2010, 5:25 PM
I love those artsy wiring diagrams