PDA

View Full Version : 1974 cb 500 twin project need some input?



johnnyboy666
01-30-2011, 2:19 AM
so this is ware im at so far, i was thinking of hard tailing this frame but since i got two of the same bikes, i kinda wanted two brat build one, but not quite sure on the next steps i know that alot of dudes stretch the swing arm and curve, or drop the seat tubes to lower the seat hight but is there any thing else to take in, or think about any advice? im all ears and would love some input! thanks, one
:banghead:
11316

11317

johnnyboy666
01-30-2011, 2:24 AM
sorry forgot to mention im new here! names johnny im from redtucky oregon, so hello i guess!

Hooligans
01-30-2011, 2:34 AM
Brat build that thing.... dropped seat rails makes the lines flow a little better. You will need to run a short shock so keep that in mind. Honda Rebel shocks are 10.5" but you can also find Suzuki Savage shocks a little cheaper and they are also 10.5". Alot of people do extend the swinger but its not a "have to do" thing. Keeping the stock length will keep the bike short... its all preference. Keep in mind that with lowering the rear you will also need to drop the front down

johnnyboy666
01-30-2011, 2:44 AM
yeah i gotta hunt down some shocks lower the top tubes and forks then see how it sits, before cutting into the swing arm i think?

Hooligans
01-30-2011, 2:58 AM
Everyone has their own way of doing things. I would drop my seat rails first.... get them where you want them. Figure out you upper shock mounts.... then see what kind of distance you have for shocks. Extending the swinger "can" change the angle of the shock allowing more room unless they are relocated

johnnyboy666
01-30-2011, 3:29 PM
do you think im going to have to relocate the top shock mounts?

Hooligans
01-30-2011, 4:26 PM
it all depends on how you do the rails. If they do have a drop but bend back up within the stock location, then no. Most rails drop down further so yes you generally need to make new mounts.

Take a look here.... this is a XS650 Brat kit. You can get an idea how it looks

http://visualimpact2.com/Merchandice.html

johnnyboy666
01-30-2011, 9:11 PM
nice that link helps a lot it;s nice to see it all broke down in photos! thanks alot for ur time man!

Hooligans
01-30-2011, 9:29 PM
no prob.... anything you need just hit me up