PDA

View Full Version : just got all-balls timken bearing kit for xs650 - which bearing is the top/bottom



jasonrenda
12-16-2010, 9:44 AM
part # 22-1015 from TC Bros. dont want to jam on these if i have em in upside down

Punkskalar
12-16-2010, 10:49 AM
part # 22-1015 from TC Bros. dont want to jam on these if i have em in upside down

last I recalled, they were the same races, but the bearings were different. The larger ID bearing goes on the bottom.

hutchings
12-16-2010, 1:53 PM
last I recalled, they were the same races, but the bearings were different. The larger ID bearing goes on the bottom.

x2 Hugh.. Races are the same, big bearing id on the bottom...

make sure you remove the old races before trying to whack in the new ones! haha

and also dont be alarmed if the top race dosnt sit flush with the neck, just make sure its seated all the way, might be 1/8" higher than the neck.

rwingsfan
12-16-2010, 11:15 PM
The 25 goes on top, the 30 goes on the bottom...