View Full Version : Could someone look over this diagram? (xs650)

06-28-2010, 2:55 PM
I made this at work in paint on a POS mac, so please pardon the roughness. I just wanted to make sure i had everything in order and see if anything is out of place. Thanks in advance for anything you might spot that looks iffy. The gray outline is my electronics box, which i want to house as much as possible. It will contain the ignition switch, kill switch, regulator/rectifier. dimmer, fuse box, and turn signal relay.

06-29-2010, 12:31 PM
30 views and no replies, anyone see anything wrong?

06-29-2010, 12:36 PM
I just see too much. What are flashers, a horn, and a speedo for? Ha ha. It's a little hard to follow, but looked right to me. Nothing jumped out at me if that's what lookin at.

06-29-2010, 12:40 PM
I need a minimum of 3 cold beers Schlitz before I could even comprehend if it's right or not. I looks solid; but don't quote me.

06-29-2010, 2:47 PM
I don't want to run any extras but i need em to pass inspection. I have bad luck with the law so i gatta play it safe unfortunately.

06-29-2010, 7:08 PM
Thanks everyone, i think i have it pretty well figured out. Just a bit anxious since i've never done this kind of wiring before. Looking to get the bike all wired up by next weekend.

06-29-2010, 10:48 PM
if your just doing it to pass inspection, why not buy a stock harness, get inspected, ride home and rip it off????

06-30-2010, 2:07 PM
I think thats what im going to do gofast. i really dont want to have a ton of shit in my bike, but i sure as hell cant afford having my bike towed or whatever. i just want the damn sticker :P

07-04-2010, 7:59 AM
moose, check out PA's dmv page for mc laws here: http://www.dmv.state.pa.us/pdotforms/pub_45/section_h.pdf

there is no need for turn signals. they want a horn, a speedo, a brake light, and a dimmer on the headlamp and that's all.

07-04-2010, 1:40 PM
thanks for the heads up metric, that'll make my life a bit easier.