PDA

View Full Version : cb wiring



jim60491
06-25-2010, 8:43 AM
just got my bike all wired up. but the only problem is when you put the bike in gear the running light cuts out. then when you pop it back in neutral the running light comes back on. anyone else have this problem. im also running a universal clutch perch set up.
if anyone could help me it would be awesome. this is the only thing holding me back from being on the road.

thanks

MIKE47
06-26-2010, 6:58 AM
I'm gonna make a guess that you somehow may have wired the neutral safety wire into your harness wrong. Maybe it's grounding your ignition circuit? You don't really need it so if you just clipped it off it might just get you going. Light green wire on the engine side of the plug. There is factory diagrams at oldmanhonda.com and a great chopper one at hondachopper.com

Hope that helps.

jim60491
06-26-2010, 10:34 AM
thanks ill give that a try

jim60491
06-27-2010, 1:15 AM
yeah i ended up having the neutral wirer grounded to the frame. so i just snipped it. so im all good now. thanks for the advice