PDA

View Full Version : Vz 800 Bobber



Arcweld
08-14-2016, 5:15 AM
hallo my name is Fredrik and i live in sweden. just want to show you some pics of my vz 800 marauder.
71527
71528
71529

sooner7nc
08-14-2016, 9:02 AM
Nice. How's that carb working out?

Arcweld
08-14-2016, 12:01 PM
Its a 1 3/4 (45mm) and it works very well!! More torque than original mikuni and better mpg. I had to lower the float bowl because this carb is mounted at almost 45 degrees when it sits in cars. So when you mount this carb like i did the fuel level is higher than the nozzle inside and its going very very rich!! So the float bowl is 10mm lower than original. I drive with the BBT needle and NO oil in damper.

Arcweld
10-24-2016, 1:35 PM
Lowered the sadle and mounted a new tail light.72632
72633