PDA

View Full Version : Custom exhaust



Cal90G
05-17-2016, 5:18 AM
I want to put a custom exhaust on my v star bobber. Any suggestions how I should go about it would be most appreciated

cggorman
05-17-2016, 7:33 AM
Unless you've got a pipe bender you'll need to buy some pre-bent sections. Bolt on your flange and start cutting up those bends until you get something that fits. Tape or tack weld as you go. I can't TIG but I do design a lot of bent tube/pipe in CAD. I like to design from the ends toward the center.

shortpork
05-17-2016, 11:51 AM
Go to harbor freight and buy the pipe roller for $150 bucks. Buy some exhaust tubing of desired size and roll it to fit the way you want. You can't get a bend in a single spot but you would need about $500 to invest into a tube bender and correct sized die to do that.

shortpork
05-17-2016, 11:59 AM
http://www.harborfreight.com/tubing-roller-99736.html

$185 but I printed out their 20% off coupon. Im sure they still got that coupon on their site