PDA

View Full Version : Shovel exhaust/squish pipe on a cone motor?



ww
04-27-2016, 3:39 PM
I like the 2-into-1 original style exhaust that panheads and generator shovels had. The kind that utilized the squish pipe under the front of the case, from the front cylinder.

I've seen just a couple pictures of said exhaust on a cone motor. Can it be done? With what modifications?

Thanks in advance

Tattooo
04-27-2016, 9:32 PM
I like the 2-into-1 original style exhaust that panheads and generator shovels had. The kind that utilized the squish pipe under the front of the case, from the front cylinder.

I've seen just a couple pictures of said exhaust on a cone motor. Can it be done? With what modifications?

Thanks in advance

It should work with no mods..... I'm not sure what it will look like but???

BoulevardTrash
04-28-2016, 7:43 AM
i'm using a squish pipe on my cone shovel. only thing you'll need to do is make a tab off your frame to hang the squish union. the originals hung off the mechanical brake crossover support. also, you may need to massage the squish part a bit to fit under the cone but nothing crazy.

ww
04-28-2016, 11:24 AM
Perfect! Thanks BlvdTrsh. I'll let you know how it goes.

Anyone else have any significant trouble with this setup?

Thanks

BurnoutNova
05-17-2016, 3:26 PM
If anyone has pictures that would be cool to see

CaptainZoop
05-25-2016, 12:40 AM
69860

westcoastzaiss
11-26-2017, 1:01 PM
Anyone use squish pipes with late model fx mids?