PDA

View Full Version : how to temporarily bypass the kill switch?



REV
05-22-2010, 12:32 PM
im going thru the electrical on the bike, (75 cb750F) and was wondering if theres a quick and easy way to bypass the kill switch so i can just rule that out all together? its an off/run/off deal.

thanks!

VJ
05-22-2010, 1:18 PM
if memory serves, it's two wires and "run" is the connected position. If that is so, stick a pin through both wires to connect them. A tiny dab of silicone or brush on electric tape will fix the holes later.

swellguy
05-22-2010, 4:19 PM
if memory serves, it's two wires and "run" is the connected position. If that is so, stick a pin through both wires to connect them. A tiny dab of silicone or brush on electric tape will fix the holes later.Words from the Honda wring trenches. Still have that turn signal beeper going on? Quick yank fixes that one.

REV
05-22-2010, 4:48 PM
yeah, i saw that. i found mine in my trunk under the seat, lol

freewheelin
05-22-2010, 8:00 PM
Ether disconnect the 2 wires that go to the kill switch or, connect them. Works for every killswitch I've seen.