PDA

View Full Version : Project "Sugar Tits"



WhiteRooster
04-28-2015, 7:57 PM
Ok i bought a 07 vt600 shadow with a twisted frame and 1600 miles on it. I bought a frame on ebay off of a 92 vt600, hoping everything would bolt up. Today it showed up at the house, so i began to compare them and the only thing i can find different is the kick stand bracket, and the rear fender mounts. So... i cut the brackets off of the 07 and welded them to the 92 frame and it turned out to look factory. I plan on port-o-walls, mini apes, slam the back, fab up a custom short exhaust, suicide shift and a few other things. I would love to do a rigid frame and pan seat BUT my future wife wants to ride so that through a wrench in my plans, so im going for a "super low tire hiding under a fender look" Also the Sugar Tits name was the name my better half came up with lol
59555
59556
59557
59558

billybiltit
04-29-2015, 1:54 PM
wtg

leon

WhiteRooster
04-29-2015, 9:30 PM
59595 Got the new frame painted and engine back in, waiting on parts to come in so i can drop it and throw on the mini apes. Oh and the white walls too

deathmetaldan
04-29-2015, 9:58 PM
glad its working out for you :)

WhiteRooster
05-03-2015, 7:53 PM
59744got the exhaust mocked up and white walls mounted today had a few hours to mess with it what do yall think59745

WhiteRooster
05-09-2015, 4:55 PM
finally done59963

WhiteRooster
05-09-2015, 4:56 PM
59964

deathmetaldan
05-10-2015, 1:39 PM
turned out pretty well, isnt over the top but still has some cool parts

darcnic
05-11-2015, 4:27 PM
Looks real nice dude. I'm digging this exhaust!

WhiteRooster
05-11-2015, 8:22 PM
I have had over the top and loved it but, this one is clean and road friendly plus she wants to ride with so i wanted to keep the fender and seat. The exhaust was loud as hell so i made some baffles out of half inch stainless tube and 2 washers cut in half welded on either side. Its much better now. today i got my jet kit in (stage 1 kit)and wow what a difference, no more back firing and no dead spots now.

WhiteRooster
05-11-2015, 8:25 PM
oh and if any wants to slam their bike the rigid way, a 10 inch bar with with holes drilled a half inch from either end turns out to be about as low as you can go with the factory fender on a vt600