PDA

View Full Version : Rear sets on a cb750



swellguy
03-30-2010, 9:42 PM
Wondering if anybody has photos of how they mounted reasets on their cb750? I'm doing a 73 café project now and just looking for some ideas. I'm still using the 4 into 4 exhaust, just shorter, so the passenger pegs won't work.
Thanks in advance.

constriktor
03-30-2010, 10:09 PM
i'd stroll through carpy's site for some photos; he's got it dialed

http://www.cb750cafe.com/

n

MB
03-31-2010, 4:27 AM
check out tarossi - can find em heaps cheaper than carpy sells em for.... nice bikes though.
I ordered a set of Raask ones for mine - should turn up within the week - so can let you know how they look/work etc if you want.
Cheers
Matt

swellguy
03-31-2010, 3:26 PM
i'd stroll through carpy's site for some photos; he's got it dialed

http://www.cb750cafe.com/

nThanks. Carpy has some nice stuff but I prefer Benji's. Carpy's got it dialed to the point where spending $400-$500 gets you a set that just bolt on. I'm building some but still using 4 into 4 exhaust, so I'm going have to fab some sort of bracket/mount between the shock mount and the passenger peg mount. Just thought someone might have already done it.

MB
04-01-2010, 4:47 AM
Ooops - I meant Tarrozi.
Same ones as carpy sells - bolt on.
I'm pretty sure i saw some for around the 280US mark on ebay.
My raask set came in at around 300 AUD.
Would have gone with Tarrozi - but you need to keep exhaust/rear footpeg bracket on frame.

Rile
04-01-2010, 1:51 PM
I don't know if this helps and/or is what you're looking for but, alot of guys at kzrider.com have used pegs off of new street bikes and there are lots of photos.

of course my lazy ass bought Tarozzi's for my kz and theyre rad. I had raasks on my old kz and IMO the tarozzi's are better.