PDA

View Full Version : DNA Springer Riser Adaptor Plate Testing Help



JHCHOPPERS
02-16-2013, 9:15 AM
We have new design for our DNA Springer Riser Adaptor Plates. This new design incorporates standard Softail Handle Bar Bushings for vibration dampening. We have a couple of prototypes made and the bushing are installed.

We are looking a for someone who is in the process of using a DNA springer and would like to test this part during their build. The part is FREE to first 2 builders who will have the time to assist and provide constructive feedback and pictures during the testing/install.

(if we have posted this in wrong section, please let me know, since the parts are FREE I wasn't sure)

Thanks
JH

36105

36106

36107

36108

philobeddoe
02-16-2013, 10:09 AM
I'm using a DNA and I will test one.

ARBY
02-16-2013, 11:15 AM
I definitley try one out if you want and do a write up with pictorial.

JHCHOPPERS
02-16-2013, 11:29 AM
I'm using a DNA and I will test one.

What is your availability to get started? We are looking for someone who has an active build and can provide feedback and pictures within 30 days?

cabinetjesus
02-16-2013, 11:34 AM
Im up for it if you need some help.

JHCHOPPERS
02-16-2013, 11:38 AM
I definitley try one out if you want and do a write up with pictorial.

What is your availability to get started? We are looking for someone who has an active build and can provide feedback and pictures within 30 days?

The write is great idea. We have sold 100s of our other adapters. This is write up ZIG ZAG did on our standard adapter:

http://www.chopcult.com/forum/showthread.php?t=11903

JHCHOPPERS
02-16-2013, 11:40 AM
Im up for it if you need some help.

Cool, what is your availability to get started? We are looking for someone who has an active build and can provide feedback and pictures within 30 days?

philobeddoe
02-16-2013, 11:47 AM
30 days is good my build is pretty close to being finished.

JHCHOPPERS
02-17-2013, 12:55 PM
30 days is good my build is pretty close to being finished.

Thanks for the feedback, lets get started. Send me an email at jh@jhchoppers.com so we can get your address.

Thanks
JH

ARBY
02-17-2013, 8:03 PM
Upon closer inspection, I don't think risers would clear my tank so I'll pass. It looks like a very neat item though. Good luck with it.

JHCHOPPERS
02-18-2013, 1:11 PM
Upon closer inspection, I don't think risers would clear my tank so I'll pass. It looks like a very neat item though. Good luck with it.

Cool, no worries.

JHCHOPPERS
03-06-2013, 10:54 AM
MM Custom Cycles has the bushing Spinger Riser installed and tested.

36928

Thanks for your help MM
JH

cwest
03-06-2013, 3:32 PM
I would be interested in this if nobody comes through. My bikes done and I can just put it on, do a review and photos of it fo r you guys.

JHCHOPPERS
03-07-2013, 2:31 PM
I would be interested in this if nobody comes through. My bikes done and I can just put it on, do a review and photos of it fo r you guys.

Send me an email at jh@jhchoppers.com so we can get your mailing address. We have a couple shops testing the design, but if you want to help.... let me know.

Thanks
JH

JHCHOPPERS
11-14-2014, 5:17 PM
philobeddoe, thought we would share our new ad we are running the "RAW BIKE" Bike Magazine, we used your bike in the ad!

Thanks
JH

53680

OleDirtyDoc
11-19-2014, 2:14 AM
How much they ginna sell for ?