PDA

View Full Version : whos runnin 1" bars on an xs or any jap bike



redlined24
08-09-2009, 4:38 AM
trying to find a clutch lever assembly that will work with the xs cable and adjuster.

the one i have been using is set up for a harley ball type cable and isnt threaded for an adjuster at the lever. its a bitch and im sick of it........i think i may cry

TemeculaTerry
08-09-2009, 8:10 AM
Im running one inch on my XS, all you have to do is grind down a 7/8 alloy leer assembly to make it fit.

erikweste
08-09-2009, 11:48 AM
Buy a dirt bike clutch (that fit 7/8" bar) that has a full nylon sleeve inside (see attached pic). The nylon sleeve is generally 1/16" thick so remove that and you have a perch that will fit a 1" bar.

~E

eightthirtysixcc
08-09-2009, 12:04 PM
Kawasaki W650 uses 1' bars so the clutch assembly will fit your UJM cable.

redlined24
08-09-2009, 4:51 PM
cool

ill go check out some dirtbike setups thanks this setup has been pissing me off for about a year haha

TRUMPNUT
08-09-2009, 7:10 PM
Also look at most modern Jap cruisers . They pretty much all use 1" nowdays
I do believe V-stars will be a bolt on

BandR
08-28-2009, 12:34 AM
yeah! i got a v-star. that thing is threaded.

whats up trumpnut! Hung out with you at the smoke out under the biltwell tent!

XStar
11-06-2009, 2:11 PM
i am running the 1" bars...i have a roadstar clutch perch and am using the stock xs cable. all i had to do was take the little insulator off the barrel on the roadstar cable and put it on the xs barrel that sits in the clutch lever.

WOMPY
11-06-2009, 4:03 PM
Most kawi vulcans run 1" bars too