Depending on the price and available colors I might be

Well after a beer and some pouting and cursing, I put it back together. I did two things different. I put the gasket on the left side. If that made a difference who knows. I also adjusted the screw 1/4 turn past contact instead of backing off. ...

So my new worm gear assembly arrived today. I put it together and the lever isn't as hard the clutch still won't disengage. While off, in 1st gear with the clutch pulled in I have to forcibly push it and can hear the clutch dragging. When I pul...

The battery way is the easiest. Get some alligator clips and dont shock or burn yourself. But your should buy a decent multimeter. I like Fluke but others might differ. I hear the Harbor Freight are decent in a pinch and Craftsman are an inexpe...

Here is what was happening with me. PMA w/ pamco and HO coil and shitty R/C car battery. Bike starts first kick on choke. Stumbles when I try to rev it. As soon as I take it off choke it acts like the right cylinder was leaning out or not firi...

I did pack the worm gear with grease. I'm leaning towards that being the culprit as everything else is new and it just popped up and I hadn't had the right side apart. I only replaced the clutch plates as I had them and I had it apart when inspect...

How is that battery? I read mixed reviews. I need a battery for my xs and these fuckin RC car batteries dont cut it.

What master cylinder are you using? Because half a bottle of fluid sounds like an extremely large amount of fluid to be in the system. Check for leaks and if there are none than try this. (I dont know if the hydraulic switch for the brake light ...